| View previous topic :: View next topic |
| Author |
Message |
BeteNoire
Veteran
Joined: 25 Sep 2005
Posts: 1827
|
 Posted: Wed Dec 06, 2006 6:17 pm Post subject: [SOLVED] by Splix - [Drukarka] Samsung ML 2010 P |
 |
|
Przyszedł czas na laserówkę. Ciekaw jestem czy komuś udało się ją zainstalować w oparciu o _dostępne w portage_ pakiety.
Drukarka działa mi jedynie w oparciu o Unified Linux Driver ale wolałbym jakieś czystsze rozwiązanie.
_________________
powered by power plant
Last edited by BeteNoire on Fri Dec 08, 2006 9:17 pm; edited 1 time in total |
|
| Back to top |
|
 |
mbar
Veteran
Joined: 19 Jan 2005
Posts: 1944
Location: Poland
|
| Posted: Wed Dec 06, 2006 7:40 pm Post subject: |
|
|
emerge foomatic z ppds?  |
|
| Back to top |
|
|
no4b
Bodhisattva
Joined: 18 Jan 2004
Posts: 774
Location: Tarnów, Poland
|
| Posted: Wed Dec 06, 2006 8:57 pm Post subject: |
|
|
Działa z cups i foomatic.
_________________
GTK2/GNOME - The weakest link! |
|
| Back to top |
|
|
BeteNoire
Veteran
Joined: 25 Sep 2005
Posts: 1827
|
| Posted: Wed Dec 06, 2006 9:37 pm Post subject: |
|
|
Mam wszystko to zainstalowane, ale czego bym nie wybrał w konfiguracji CUPSa to nie drukuje.
_________________
powered by power plant |
|
| Back to top |
|
|
no4b
Bodhisattva
Joined: 18 Jan 2004
Posts: 774
Location: Tarnów, Poland
|
| Posted: Thu Dec 07, 2006 11:12 am Post subject: |
|
|
A jakieś błędy? Odpal z konsoli program, który ma drukować, może coś wypluje.
_________________
GTK2/GNOME - The weakest link! |
|
| Back to top |
|
|
BeteNoire
Veteran
Joined: 25 Sep 2005
Posts: 1827
|
| Posted: Thu Dec 07, 2006 1:17 pm Post subject: |
|
|
To może inaczej: jaki sterownik wybierasz w CUPSie, no4b?
Co bym nie wybrał u siebie to nie drukuje (klikam na stronę testowową). W przypadku niektórych opcji drukarka się uruchamia, coś tam mieli, ale również nie drukuje.
Wyczytałem, że ludzie drukują po wybraniu ML-200 i ML-1710 ale u mnie to nie działa, razem z resztą rekomendowanych przez CUPSa opcji.
Error_log z CUPSa:
| Code: | I [07/Dec/2006:13:59:23 +0100] Saving job cache file "/var/cache/cups/job.cache"...
I [07/Dec/2006:13:59:23 +0100] Listening to 127.0.0.1:631 (IPv4)
I [07/Dec/2006:13:59:23 +0100] Listening to ::1:631 (IPv6)
I [07/Dec/2006:13:59:23 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [07/Dec/2006:13:59:23 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [07/Dec/2006:13:59:23 +0100] Using default TempDir of /var/spool/cups/tmp...
I [07/Dec/2006:13:59:23 +0100] Cleaning out old temporary files in "/var/spool/cups/tmp"...
I [07/Dec/2006:13:59:23 +0100] Configured for up to 100 clients.
I [07/Dec/2006:13:59:23 +0100] Allowing up to 100 client connections per host.
I [07/Dec/2006:13:59:23 +0100] Using policy "default" as the default!
I [07/Dec/2006:13:59:23 +0100] Full reload is required.
I [07/Dec/2006:13:59:23 +0100] Loaded MIME database from '/etc/cups': 34 types, 38 filters...
I [07/Dec/2006:13:59:23 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [07/Dec/2006:13:59:23 +0100] Full reload complete.
I [07/Dec/2006:13:59:23 +0100] Listening to 127.0.0.1:631 on fd 2...
E [07/Dec/2006:13:59:23 +0100] Unable to open listen socket for address ::1:631 - Address family not supported by protocol.
I [07/Dec/2006:13:59:23 +0100] Listening to /var/run/cups/cups.sock on fd 3...
I [07/Dec/2006:13:59:51 +0100] Started "/usr/libexec/cups/cgi-bin/printers.cgi" (pid=2022)
I [07/Dec/2006:13:59:55 +0100] Started "/usr/libexec/cups/cgi-bin/admin.cgi" (pid=2024)
I [07/Dec/2006:13:59:58 +0100] Started "/usr/libexec/cups/cgi-bin/admin.cgi" (pid=2025)
I [07/Dec/2006:13:59:58 +0100] Started "/usr/libexec/cups/daemon/cups-deviced" (pid=2026)
E [07/Dec/2006:13:59:58 +0100] [CGI] Unable to scan "@LOCAL"!
I [07/Dec/2006:14:00:03 +0100] Started "/usr/libexec/cups/cgi-bin/admin.cgi" (pid=2039)
I [07/Dec/2006:14:00:03 +0100] Started "/usr/libexec/cups/daemon/cups-driverd" (pid=2040)
I [07/Dec/2006:14:00:09 +0100] Started "/usr/libexec/cups/cgi-bin/admin.cgi" (pid=2045)
I [07/Dec/2006:14:00:09 +0100] Started "/usr/libexec/cups/daemon/cups-driverd" (pid=2046)
I [07/Dec/2006:14:01:59 +0100] Started "/usr/libexec/cups/cgi-bin/admin.cgi" (pid=2259)
E [07/Dec/2006:14:02:00 +0100] CUPS-Add-Modify-Printer: Unauthorized
I [07/Dec/2006:14:02:00 +0100] Setting Samsung2010 device-uri to "usb://Samsung/ML-2010" (was "usb://Samsung/ML-2010".)
I [07/Dec/2006:14:02:00 +0100] Setting Samsung2010 printer-is-accepting-jobs to 1 (was 1.)
I [07/Dec/2006:14:02:00 +0100] Setting Samsung2010 printer-state to 3 (was 3.)
I [07/Dec/2006:14:02:00 +0100] Saving printers.conf...
I [07/Dec/2006:14:02:00 +0100] Printer "Samsung2010" modified by "dexter".
I [07/Dec/2006:14:02:05 +0100] Started "/usr/libexec/cups/cgi-bin/admin.cgi" (pid=2262)
I [07/Dec/2006:14:02:05 +0100] Started "/usr/libexec/cups/cgi-bin/printers.cgi" (pid=2263)
I [07/Dec/2006:14:02:12 +0100] Scheduler shutting down normally.
I [07/Dec/2006:14:02:12 +0100] Saving remote.cache...
I [07/Dec/2006:14:02:12 +0100] Saving job cache file "/var/cache/cups/job.cache"...
I [07/Dec/2006:14:02:12 +0100] Listening to 127.0.0.1:631 (IPv4)
I [07/Dec/2006:14:02:12 +0100] Listening to ::1:631 (IPv6)
I [07/Dec/2006:14:02:12 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [07/Dec/2006:14:02:12 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [07/Dec/2006:14:02:12 +0100] Using default TempDir of /var/spool/cups/tmp...
I [07/Dec/2006:14:02:12 +0100] Cleaning out old temporary files in "/var/spool/cups/tmp"...
I [07/Dec/2006:14:02:12 +0100] Configured for up to 100 clients.
I [07/Dec/2006:14:02:12 +0100] Allowing up to 100 client connections per host.
I [07/Dec/2006:14:02:12 +0100] Using policy "default" as the default!
I [07/Dec/2006:14:02:12 +0100] Full reload is required.
I [07/Dec/2006:14:02:12 +0100] Loaded MIME database from '/etc/cups': 34 types, 38 filters...
I [07/Dec/2006:14:02:12 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [07/Dec/2006:14:02:12 +0100] Full reload complete.
I [07/Dec/2006:14:02:12 +0100] Listening to 127.0.0.1:631 on fd 2...
E [07/Dec/2006:14:02:12 +0100] Unable to open listen socket for address ::1:631 - Address family not supported by protocol.
I [07/Dec/2006:14:02:12 +0100] Listening to /var/run/cups/cups.sock on fd 3...
I [07/Dec/2006:14:02:21 +0100] Started "/usr/libexec/cups/cgi-bin/printers.cgi" (pid=2386)
I [07/Dec/2006:14:02:21 +0100] Adding start banner page "none" to job 311.
I [07/Dec/2006:14:02:21 +0100] Adding end banner page "none" to job 311.
I [07/Dec/2006:14:02:21 +0100] Job 311 queued on "Samsung2010" by "dexter".
I [07/Dec/2006:14:02:21 +0100] Started filter /usr/libexec/cups/filter/pstops (PID 2387) for job 311.
I [07/Dec/2006:14:02:21 +0100] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 2388) for job 311.
I [07/Dec/2006:14:02:21 +0100] Started backend /usr/libexec/cups/backend/usb (PID 2389) for job 311.
I [07/Dec/2006:14:02:24 +0100] Started "/usr/libexec/cups/cgi-bin/printers.cgi" (pid=2399)
I [07/Dec/2006:14:03:56 +0100] Started "/usr/libexec/cups/cgi-bin/printers.cgi" (pid=2570)
I [07/Dec/2006:14:04:03 +0100] Started "/usr/libexec/cups/cgi-bin/printers.cgi" (pid=2619)
I [07/Dec/2006:14:04:04 +0100] Adding start banner page "none" to job 312.
I [07/Dec/2006:14:04:04 +0100] Adding end banner page "none" to job 312.
I [07/Dec/2006:14:04:04 +0100] Job 312 queued on "Samsung2010" by "guest".
I [07/Dec/2006:14:04:04 +0100] Started filter /usr/libexec/cups/filter/pstops (PID 2620) for job 312.
I [07/Dec/2006:14:04:04 +0100] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 2621) for job 312.
I [07/Dec/2006:14:04:04 +0100] Started backend /usr/libexec/cups/backend/usb (PID 2622) for job 312.
I [07/Dec/2006:14:04:06 +0100] Started "/usr/libexec/cups/cgi-bin/printers.cgi" (pid=2632) |
Nie muszę chyba dodawać, że innych błędów nie zaobserwowałem, bo już dawno bym je wkleił.
_________________
powered by power plant |
|
| Back to top |
|
|
BeteNoire
Veteran
Joined: 25 Sep 2005
Posts: 1827
|
| Posted: Fri Dec 08, 2006 9:16 pm Post subject: |
|
|
Rozwiązanie:
Ściągamy stąd http://www.lastlog.de/wiki/index.php/ML1610,_Gentoo,_Cups do overlaya dwa potrzebne ebuildy i emergujemy Splix.
Bugreport Spliksa jest w portage. Miejmy nadzieję, że wkrótce ebuild pojawi się w oficjalnym drzewku.
_________________
powered by power plant |
|
| Back to top |
|
|
no4b
Bodhisattva
Joined: 18 Jan 2004
Posts: 774
Location: Tarnów, Poland
|
| Posted: Fri Dec 08, 2006 9:29 pm Post subject: |
|
|
(sorry, za brak odpowiedzi wcześniej, nie zauważyłem, że w tym temacie był post)
U mnie obeszło się bez Spliksa. Wybrałem ML-1710 i dziłało.
_________________
GTK2/GNOME - The weakest link! |
|
| Back to top |
|
|
|
Polskie forum (Polish) 
