Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
ATI radeon Sticky
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3, 4 ... 74, 75, 76  Next  
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
StarWarsHater
n00b
n00b


Joined: 22 May 2003
Posts: 30
Location: College Station, TX

PostPosted: Thu May 22, 2003 7:10 pm    Post subject: Reply with quote

Well, I think I have another problem,

glxinfo has me on for direct rendering but has "disabling TCL support" near the top of it as well as glxgears. Any info on that?

Plus my glxgears seem to be quite low compared to others:
660fps 1280x1024 24bit depth
1800+ 512MD SDRAM Radeon 7000
Back to top
View user's profile Send private message
stustill
Guru
Guru


Joined: 25 Feb 2003
Posts: 333
Location: Aberdeen, Scotland

PostPosted: Thu May 22, 2003 7:48 pm    Post subject: Reply with quote

StarWarsHater:

You, I might be able to help. That is the same system I have got, except my CPU is slower. Could you perhaps post your /usr/src/linux/.config and your /etc/X11/XF86Config files, so that I might take a look at them, see if I can suggest some pointers.

Stu (Star Wars Lover) :P
Back to top
View user's profile Send private message
StarWarsHater
n00b
n00b


Joined: 22 May 2003
Posts: 30
Location: College Station, TX

PostPosted: Thu May 22, 2003 8:01 pm    Post subject: Reply with quote

/etc/X11/XF86Config

Code:


Section "ServerLayout"
   Identifier     "XFree86 Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Mouse0" "CorePointer"
   InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
   RgbPath      "/usr/X11R6/lib/X11/rgb"
   ModulePath   "/usr/X11R6/lib/modules"
   FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
   FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
   FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
   FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
   FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
   FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
   Load  "record"
   Load  "extmod"
   Load  "dbe"
   Load  "glx"
   Load  "dri"
   Load  "xtrap"
   Load  "type1"
   Load  "speedo"
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "keyboard"
EndSection

Section "InputDevice"
   Identifier  "Mouse0"
   Driver      "mouse"
   Option       "Protocol" "IMPS/2"
   Option       "Device" "/dev/input/mice"
   Option       "ZAxisMapping" "4 5"
EndSection

Section "Monitor"

   #DisplaySize     310   230   # mm
   Identifier   "Monitor0"
   VendorName   "KDS"
   ModelName    "ions VS-7i"
   HorizSync    31.5 - 64.3
   VertRefresh  40.0 - 150.0
   Option       "DPMS"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"               # [<bool>]
        #Option     "SWcursor"              # [<bool>]
        #Option     "Dac6Bit"               # [<bool>]
        #Option     "Dac8Bit"               # [<bool>]
        #Option     "ForcePCIMode"          # [<bool>]
        #Option     "CPPIOMode"             # [<bool>]
        #Option     "CPusecTimeout"         # <i>
        Option     "AGPMode" "4"                # <i>
        #Option     "AGPFastWrite"          # [<bool>]
        #Option     "AGPSize"               # <i>
        #Option     "RingSize"              # <i>
        #Option     "BufferSize"            # <i>
        #Option     "EnableDepthMoves"      # [<bool>]
        Option     "EnablePageFlip" "True"        # [<bool>]
        #Option     "NoBackBuffer"          # [<bool>]
        #Option     "DRIReinit"             # [<bool>]
        #Option     "PanelOff"              # [<bool>]
        #Option     "DDCMode"               # [<bool>]
        #Option     "MonitorLayout"         # [<str>]
        #Option     "IgnoreEDID"            # [<bool>]
        #Option     "OverlayOnCRTC2"        # [<bool>]
        #Option     "CloneMode"             # [<str>]
        #Option     "CloneHSync"            # [<str>]
        #Option     "CloneVRefresh"         # [<str>]
        #Option     "UseFBDev"              # [<bool>]
        #Option     "VideoKey"              # <i>
   Identifier  "Card0"
   Driver      "radeon"
   VendorName  "ATI Technologies Inc"
   BoardName   "Radeon RV100 QY [Radeon 7000/VE]"
   BusID       "PCI:1:0:0"
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   DefaultDepth 24
   DefaultFbBpp 32
   SubSection "Display"
      Depth     1
   EndSubSection
   SubSection "Display"
      Depth     4
   EndSubSection
   SubSection "Display"
      Depth     8
   EndSubSection
   SubSection "Display"
      Depth     15
   EndSubSection
   SubSection "Display"
      Depth     16
   EndSubSection
   SubSection "Display"
      Depth     24
   EndSubSection
EndSection

Section "DRI"
   Mode 0666
EndSection


sorry, i'm a bit of a noob, /usr/src/linux/.config? I can't see to find that
and now i'm getting 336fps in glxgears =/
Back to top
View user's profile Send private message
crowbert
Tux's lil' helper
Tux's lil' helper


Joined: 28 Apr 2003
Posts: 113

PostPosted: Thu May 22, 2003 8:36 pm    Post subject: Reply with quote

My setup is working a bit better. For those still struggling, here's what I've done (mostly just a rehash of previous posts).

First, when compiling my kernel, I needed to set several options:

Processor type and reatures -> MTRR (Memory Type Range Register) support: Yes
Character devices -> /dev/agpgart (AGP Support): Yes

Then below that, you have to select yes for the type of motherboard you have. It should be safe to set them all to yes, but you only need the one for your system. For mine, it was the "Intel 440LX/BX/GX and ... support."

I also turned off "Direct Rendering Manager (XFree86 DRI support)."

Then after compiling and installing my kernel, I re-emerged xfree-drm to refresh the radeon module, which I have set to auto-load.

I have my /etc/XF86Config set up as described in earlier posts: I uncommented the lines to load the glx and dri modules in the section "Module." I added the "DRI" section with Mode set to 0666. I'm using the "radeon" driver in the "Device" section.

I am not using the ati-drivers. I believe that the setup for using them is a bit different, and I haven't investigated it.

Now glxinfo reports that it is using the direct rendering, and glxgears went from 260fps to 499fps with the default window size. I'm running at about 1600x1000 with 24bpp (yes, it's an odd-sized monitor). My card is a Radeon VE with 32MB.
Back to top
View user's profile Send private message
stustill
Guru
Guru


Joined: 25 Feb 2003
Posts: 333
Location: Aberdeen, Scotland

PostPosted: Thu May 22, 2003 8:55 pm    Post subject: Reply with quote

Star Wars Hater:
The .config file is the file that contains all the information about which kernel options to compile. It is generated when you run make menuconfig. It is a hidden file (because it starts with a .) in the /usr/src/linux directory (this directory links to the actual directory that your kernel source lives in.

crowbert:
My machine has a Radeon 64Mb ViVo, and the CPU is an athlon-tbird 1GHz, with 512Mb of SDRAM. I get ~900FPS from glxgears, runnign 1600x1200x24bit. How does your machines speed compare, because maybe that is all you should be getting? How does tuxracer run? Okay, or unplayable?

Stu
Back to top
View user's profile Send private message
crowbert
Tux's lil' helper
Tux's lil' helper


Joined: 28 Apr 2003
Posts: 113

PostPosted: Thu May 22, 2003 9:31 pm    Post subject: Reply with quote

I'm running a 2.53GHz P4 with 1GB SDRAM, so my machine is faster than yours. However, my Radeon is a 32MB card, and /proc/pci reports it as a "Radeon VE QY," which is apparently a 7000 dual display edition. So your card may be better. I haven't installed tuxracer yet.

I think I'll call doubling the performance a win and move on. Maybe next I'll find a second monitor and see what I can do with that.
Back to top
View user's profile Send private message
StarWarsHater
n00b
n00b


Joined: 22 May 2003
Posts: 30
Location: College Station, TX

PostPosted: Thu May 22, 2003 9:35 pm    Post subject: Reply with quote

.config

Code:

#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_LOLAT=y
# CONFIG_LOLAT_SYSCTL is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M586MMX31 is not set
# CONFIG_M686 is not set
# CONFIG_MPPRO31 is not set
# CONFIG_M68631 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMIII31 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MPENTIUM431 is not set
# CONFIG_MK6 is not set
# CONFIG_MK6231 is not set
# CONFIG_MK7 is not set
# CONFIG_MK731 is not set
CONFIG_MXP31=y
# CONFIG_MMP31 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_HAS_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_MCE=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGHMEM is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_TSC_DISABLE is not set
CONFIG_X86_TSC=y
CONFIG_HAVE_DEC_LOCK=y

#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_ISA is not set
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PM=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# ACPI Support
#
# CONFIG_ACPI is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play configuration
#
CONFIG_PNP=y
# CONFIG_ISAPNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BLK_STATS=y

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set

#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CMD680 is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set

#
# SCSI support
#
# CONFIG_SCSI is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_APRICOT is not set
# CONFIG_NET_BCM4400 is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
# CONFIG_TC35815 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_NET_BROADCOM is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Input core support
#
CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
# CONFIG_MK712_MOUSE is not set

#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_INPUT_NS558 is not set
# CONFIG_INPUT_LIGHTNING is not set
# CONFIG_INPUT_PCIGAME is not set
# CONFIG_INPUT_CS461X is not set
# CONFIG_INPUT_EMU10K1 is not set
# CONFIG_INPUT_SERIO is not set
# CONFIG_INPUT_SERPORT is not set
# CONFIG_INPUT_ANALOG is not set
# CONFIG_INPUT_A3D is not set
# CONFIG_INPUT_ADI is not set
# CONFIG_INPUT_COBRA is not set
# CONFIG_INPUT_GF2K is not set
# CONFIG_INPUT_GRIP is not set
# CONFIG_INPUT_INTERACT is not set
# CONFIG_INPUT_TMDC is not set
# CONFIG_INPUT_SIDEWINDER is not set
# CONFIG_INPUT_IFORCE_USB is not set
# CONFIG_INPUT_IFORCE_232 is not set
# CONFIG_INPUT_WARRIOR is not set
# CONFIG_INPUT_MAGELLAN is not set
# CONFIG_INPUT_SPACEORB is not set
# CONFIG_INPUT_SPACEBALL is not set
# CONFIG_INPUT_STINGER is not set
# CONFIG_INPUT_DB9 is not set
# CONFIG_INPUT_GAMECON is not set
# CONFIG_INPUT_TURBOGRAFX is not set
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_AMD_RNG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_I810 is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD_8151 is not set
CONFIG_AGP_SIS=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_DRM=y
# CONFIG_DRM_OLD is not set
CONFIG_DRM_NEW=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I810_XFREE_41 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
# CONFIG_QIFACE_COMPAT is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_SUPERMOUNT is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_UMSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_FS is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_DMAPI is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_PAGEBUF_DEBUG is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set

#
# Frame-buffer support
#
# CONFIG_FB is not set

#
# Sound
#
CONFIG_SOUND=y
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
CONFIG_SOUND_EMU10K1=m
# CONFIG_MIDI_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
CONFIG_SOUND_ES1371=m
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_FORTE is not set
CONFIG_SOUND_ICH=m
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_LONG_TIMEOUT is not set
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_UHCI_ALT=y
CONFIG_USB_OHCI=y
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set

#
# Bluetooth support
#
# CONFIG_BLUEZ is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set

#
# Library routines
#
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set
[/code]
Back to top
View user's profile Send private message
stustill
Guru
Guru


Joined: 25 Feb 2003
Posts: 333
Location: Aberdeen, Scotland

PostPosted: Thu May 22, 2003 10:44 pm    Post subject: Reply with quote

StarWarsHater:

Try going recompiling your kernel, removing, after turning OFF Character Devices>Direct Rendering Management (XFree86 DRI Support). Then type emerge xfree-drm, with the USE flags that I posted before. Then rmmod radeon, insmod radeon, and start x, see if that helps!

Stu
Back to top
View user's profile Send private message
StarWarsHater
n00b
n00b


Joined: 22 May 2003
Posts: 30
Location: College Station, TX

PostPosted: Fri May 23, 2003 12:04 am    Post subject: Reply with quote

Tried it, netted me about 10fps :(

At least it gave me an opportunity to remove some stuff I didn't need in my kernel :)
Back to top
View user's profile Send private message
stustill
Guru
Guru


Joined: 25 Feb 2003
Posts: 333
Location: Aberdeen, Scotland

PostPosted: Fri May 23, 2003 12:12 am    Post subject: Reply with quote

StarWarsHater:

What kernel are you running?
What are your CFLAGS?
What are your USE flags?
What is ACCEPT_KEYWORDS set to?
What version of xfree are you running?

Stu
Back to top
View user's profile Send private message
StarWarsHater
n00b
n00b


Joined: 22 May 2003
Posts: 30
Location: College Station, TX

PostPosted: Fri May 23, 2003 12:35 am    Post subject: Reply with quote

linux-2.4.20-gaming-r3

CFLAGS="-mcpu=athlon-xp -03 pipe"

USE="gnome gtk -kde -qt radeon -sis -rage128 -matrix -3dfx -gamma -i8x0"

ACCEPT_KEYWORDS="~x86"

XFree 4.3.0-r2 and XFree DRM 4.3.0-r2

Thanks for taking the time...
Back to top
View user's profile Send private message
stustill
Guru
Guru


Joined: 25 Feb 2003
Posts: 333
Location: Aberdeen, Scotland

PostPosted: Fri May 23, 2003 1:11 am    Post subject: Reply with quote

Have you re-emerged xfree-drm since your last kernel compile? If you haven't try that!

Stu
Back to top
View user's profile Send private message
StarWarsHater
n00b
n00b


Joined: 22 May 2003
Posts: 30
Location: College Station, TX

PostPosted: Fri May 23, 2003 1:41 am    Post subject: Reply with quote

umerged and re-emerged :(

I dunno if I just wanna take 370fps and be happy (since one of my friends can't even get that as of now)

Might re-do my whole gentoo, I probably have done something stupid or something old is conflicting, etc etc. This is my learning experience after all :wink:
Back to top
View user's profile Send private message
stustill
Guru
Guru


Joined: 25 Feb 2003
Posts: 333
Location: Aberdeen, Scotland

PostPosted: Fri May 23, 2003 1:53 am    Post subject: Reply with quote

Are you sure that you require generic SiS support. That could be causing problems if you don't need that. What motherboard do you have?

Stu
Back to top
View user's profile Send private message
StarWarsHater
n00b
n00b


Joined: 22 May 2003
Posts: 30
Location: College Station, TX

PostPosted: Fri May 23, 2003 2:48 am    Post subject: Reply with quote

ECS K7S5A (SiS 735 Chipset)

did some searching and googling, other people use the generic SiS support and say its fine. Odd.

But then again it is odd that Samba mounts will only connect to my Windows box with username=Administrator and no other users, including other admin accounts O_o At least it mounts.

Same with this, it works, kinda. Just not as expected.
Back to top
View user's profile Send private message
guy
Apprentice
Apprentice


Joined: 31 Mar 2003
Posts: 286
Location: USA

PostPosted: Fri May 23, 2003 6:30 am    Post subject: omfg omfg omfg Finally Reply with quote

FINALLY got this damn thing working. If you are still having trouble I recommend that you enable AGP (in kernel, not module) and turn on ALL boards if you dont know which you have (but leave dri/drm stuff off) I thought I had the i810.. Im an idiot.. 845.. anyways, went from 280 to 1570!



Also turn on AGP to 4X in XF86config if you have it (Option "AGPMode" "4")
check "man radeon" for more about the dif. options



THANK YOUUUUUU!!!

btw, compaq presario 2800T, 64 MB Radeon M7 (7500M) 2 GHz, 512 DDR RAM


[edit]
OMFG turn on Option EnablePageFlip "True" and I jumped to 1920!!!!

280 -> 1570 -> 1920!!!! happy day!!!!
Back to top
View user's profile Send private message
StarWarsHater
n00b
n00b


Joined: 22 May 2003
Posts: 30
Location: College Station, TX

PostPosted: Fri May 23, 2003 6:58 am    Post subject: Reply with quote

I took guy's approach and recomplied for all boards

Still stuck at ~370fps

Just for grins, glxinfo:

Code:

name of display: :0.0
disabling TCL support
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
client glx vendor string: SGI
client glx version string: 1.2
client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI Radeon 20020611 AGP 4x x86/MMX/3DNow!/SSE NO-TCL
OpenGL version string: 1.2 Mesa 4.0.4
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
    GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
    GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
    GL_EXT_clip_volume_hint, GL_EXT_convolution, GL_EXT_compiled_vertex_array,
    GL_EXT_histogram, GL_EXT_packed_pixels, GL_EXT_polygon_offset,
    GL_EXT_rescale_normal, GL_EXT_secondary_color, GL_EXT_texture3D,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
    GL_EXT_texture_object, GL_EXT_texture_lod_bias, GL_EXT_vertex_array,
    GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat, GL_MESA_window_pos,
    GL_NV_blend_square, GL_NV_texgen_reflection, GL_SGI_color_matrix,
    GL_SGI_color_table, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
 
   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 24  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x24 24 tc  0 24  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x25 24 tc  0 24  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x26 24 tc  0 24  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x27 24 tc  0 24  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x28 24 tc  0 24  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x29 24 tc  0 24  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x2a 24 tc  0 24  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2b 24 dc  0 24  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x2c 24 dc  0 24  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2d 24 dc  0 24  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x2e 24 dc  0 24  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2f 24 dc  0 24  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x30 24 dc  0 24  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x31 24 dc  0 24  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x32 24 dc  0 24  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
Back to top
View user's profile Send private message
guy
Apprentice
Apprentice


Joined: 31 Mar 2003
Posts: 286
Location: USA

PostPosted: Fri May 23, 2003 7:38 am    Post subject: Reply with quote

StarWarsHater wrote:
I took guy's approach and recomplied for all boards

Still stuck at ~370fps



Well the glxinfo says your rendering is working and lists the right driver (I think)

1) Has it always been at 370 fps?
2) Did you remember all the tidbits
---emerge xfree-drm AFTER doing kernel (to overwrite any other radeon drivers
---opengl-update xfree (?)
3) what's your XFConfig looking like?


btw, I could be wrong about compiling in all boards... someone else suggested and since my problem was I chose the wrong one I threw it out there.


I knew I had the wrong board because in my /var/log/XFree86.0.log (I think it is) it said something about AGP not working and my card being strictly PCI.
Back to top
View user's profile Send private message
guy
Apprentice
Apprentice


Joined: 31 Mar 2003
Posts: 286
Location: USA

PostPosted: Fri May 23, 2003 7:41 am    Post subject: more! more!!!! Reply with quote

I guess I dont know much about XFree/graphics/drivers, but I was wondering if this driver can turn my device into a framebuffer device and if so, will this make transparencies for things like karamba better, or is that a little while off?



BTW, once you get some nice framerates for glxgear, try celestia. It's pretty cool. (open it and hit d for a demo)
Back to top
View user's profile Send private message
StarWarsHater
n00b
n00b


Joined: 22 May 2003
Posts: 30
Location: College Station, TX

PostPosted: Fri May 23, 2003 9:37 am    Post subject: Reply with quote

Yes, I've been stuck at 370 give or take.
Get 538fps in 16bit color.

I've re-emerged DRM after the kernel re-compile.

Probably gonna reset up Gentoo, since I've got all the kinks in my install process down. But now, time for sleep. :D

XFConfig is in a post above, haven't changed anything.
Back to top
View user's profile Send private message
paranode
l33t
l33t


Joined: 06 Mar 2003
Posts: 679
Location: Texas

PostPosted: Fri May 23, 2003 3:41 pm    Post subject: Reply with quote

StarWarsHater wrote:
Well, I think I have another problem,

glxinfo has me on for direct rendering but has "disabling TCL support" near the top of it as well as glxgears. Any info on that?

Plus my glxgears seem to be quite low compared to others:
660fps 1280x1024 24bit depth
1800+ 512MD SDRAM Radeon 7000


This may indicate that your card does not have hardware TCL support, which could explain the lower framerates. Also it doesn't help that it uses SDRAM. Since DRI is actually enabled it may just be the limit of your card, unless you know otherwise from others who have it.


Otherwise the gods are just frowning upon you because you're an Aggie who hates Star Wars :wink: :lol:
_________________
Meh.
Back to top
View user's profile Send private message
stustill
Guru
Guru


Joined: 25 Feb 2003
Posts: 333
Location: Aberdeen, Scotland

PostPosted: Fri May 23, 2003 4:40 pm    Post subject: Reply with quote

It could be, you certainly have DRI enabled. I was under the impression that all radeon cards had TCL (Transform, Clipping, Lighting) because that is the T&L that all modern gfx cards have. You are right ot have generic SiS support though. I would try researching the specifications of your card in regards to its T&L engine. If you are unlucky, it just won't work :(

Stu
Back to top
View user's profile Send private message
crowbert
Tux's lil' helper
Tux's lil' helper


Joined: 28 Apr 2003
Posts: 113

PostPosted: Fri May 23, 2003 4:47 pm    Post subject: Reply with quote

I've gone from 499fps to 612fps with the options in my "Device" section:
Code:

    Option "AGPMode" "4"
    Option "AGPFastWrite" "True"
    Option "EnablePageFlip" "True"

Still not close to the 1920fps that guy reported, but he has a better card.
Back to top
View user's profile Send private message
guy
Apprentice
Apprentice


Joined: 31 Mar 2003
Posts: 286
Location: USA

PostPosted: Fri May 23, 2003 6:26 pm    Post subject: Reply with quote

StarWarsHater wrote:
Yes, I've been stuck at 370 give or take.
Get 538fps in 16bit color.

I've re-emerged DRM after the kernel re-compile.

Probably gonna reset up Gentoo, since I've got all the kinks in my install process down. But now, time for sleep. :D

XFConfig is in a post above, haven't changed anything.



1) Try editing out the PCI 1:0:0 line under device in XF86Config. I dont know if this changes anything, but this was one of the things I tried.

Also, try posting your /var/log/XFree86.0.log
Back to top
View user's profile Send private message
StarWarsHater
n00b
n00b


Joined: 22 May 2003
Posts: 30
Location: College Station, TX

PostPosted: Fri May 23, 2003 7:07 pm    Post subject: Reply with quote

First things first: There's nothing wrong with an Aggie that doesn't like Star Wars :)

On to business:
Quoted from the http://dri.sourceforge.net/doc/DRIuserguide.html about the Radeon 7x00 series:
Quote:

While this driver supports many of the features of ATI Radeon cards, we do not yet fully support the card's TCL features. This work is progressing, but is not yet ready.


So maybe one day I will have it, just not yet.

Tried the editing out PCI 1:0:0, no dice. Same score.
Back to top
View user's profile Send private message
Display posts from previous:   
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Desktop Environments All times are GMT
Goto page Previous  1, 2, 3, 4 ... 74, 75, 76  Next
Page 3 of 76

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum