| View previous topic :: View next topic |
| Author |
Message |
F-0_ICE
l33t
Joined: 06 Dec 2004
Posts: 679
|
 Posted: Sat Mar 04, 2006 8:56 pm Post subject: kernel help |
 |
|
hi i finaaly got around to installing gentoo on my new computer (see sig) and was wondering if anyone could possibly help with my kernel config. this is the first amd64 machince i have ever used so i am not familiar with the ins and outs of it. for basic information use my sig link also heres the lspci -v of the machine. thanks for the help.
| Code: |
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
Subsystem: Hewlett-Packard Company Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64
I/O ports at 4100 [disabled] [size=32]
Memory at <ignored> (64-bit, non-prefetchable)
00:01.0 PCI bridge: ATI Technologies Inc Unknown device 5a3f (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000d8000000-00000000dff00000
Capabilities: [44] HyperTransport: MSI Mapping
Capabilities: [b0] #0d [0000]
00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
I/O ports at fe00 [size=8]
I/O ports at fd00 [size=4]
I/O ports at fc00 [size=8]
I/O ports at fb00 [size=4]
I/O ports at fa00 [size=16]
Memory at fe02f000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 40000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185
Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185
Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
Subsystem: Hewlett-Packard Company Unknown device 2a24
Flags: 66MHz, medium devsel
I/O ports at 0500 [size=16]
Memory at fe02b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at f800 [size=16]
Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
Subsystem: Hewlett-Packard Company Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: fde00000-fdefffff
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
Subsystem: Hewlett-Packard Company Unknown device 2a25
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 193
Memory at fe02a000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
01:05.0 VGA compatible controller: ATI Technologies Inc RS480 [Radeon Xpress 200G Series] (prog-if 00 [VGA])
Subsystem: Hewlett-Packard Company Unknown device 2a24
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 5
Memory at d8000000 (32-bit, prefetchable) [size=128M]
I/O ports at ef00 [size=256]
Memory at fddf0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fdd00000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
02:01.0 Communication controller: Agere Systems Unknown device 0620
Subsystem: Agere Systems Unknown device 0620
Flags: bus master, medium devsel, latency 64, IRQ 255
I/O ports at df00 [size=256]
Capabilities: [f8] Power Management version 3
02:02.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
Subsystem: Linksys Linksys WMP54G 2.0 PCI Adapter
Flags: bus master, slow devsel, latency 64, IRQ 11
Memory at fdcfc000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Hewlett-Packard Company Unknown device 2a24
Flags: bus master, medium devsel, latency 64, IRQ 201
I/O ports at de00 [size=256]
Memory at fdcff000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at fde00000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
02:04.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a24
Flags: bus master, medium devsel, latency 64, IRQ 169
Memory at fdcfe000 (32-bit, non-prefetchable) [size=2K]
I/O ports at dd00 [size=128]
Capabilities: [50] Power Management version 2
|
just to note i can't get to the internet on gentoo yet cause of my rt2500 card.
_________________
~AMD64
AMD: Athlon64 X2 3800+
2G PC3200
ATI: RADEON HD 4350
Linksys: WMP54G
True Knowledge is Best Acquired Through Experience. |
|
| Back to top |
|
 |
MrUlterior
Guru
Joined: 22 Mar 2005
Posts: 511
Location: Switzerland
|
| Posted: Sun Mar 05, 2006 11:34 am Post subject: |
|
|
I doubt anyone is going create & post a .config file for you 
Why not start by compiling in SerialMonkeys ralink drivers for your ra2500?
_________________
Misanthropy 2.0 - enough hate to go around
|
|
| Back to top |
|
|
drwook
Veteran
Joined: 30 Mar 2005
Posts: 1324
Location: London
|
|
| Back to top |
|
|
F-0_ICE
l33t
Joined: 06 Dec 2004
Posts: 679
|
| Posted: Sun Mar 05, 2006 4:05 pm Post subject: |
|
|
| MrUlterior wrote: | I doubt anyone is going create & post a .config file for you
Why not start by compiling in SerialMonkeys ralink drivers for your ra2500? |
never expected that just wanted some thoughts on some things like how do i enable hypertransport for my proc and what about sata? wheres that? some things i can't seem to find.
as for rt2500 it doesn't work with a smp kernel and running wire isn't an option for me though i wish it were...
_________________
~AMD64
AMD: Athlon64 X2 3800+
2G PC3200
ATI: RADEON HD 4350
Linksys: WMP54G
True Knowledge is Best Acquired Through Experience. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
