| View previous topic :: View next topic |
| Author |
Message |
FarSide
n00b
Joined: 05 Apr 2003
Posts: 9
|
 Posted: Wed Apr 30, 2003 12:19 am Post subject: Problem with PCMCIA, strange cardmanager error on boot |
 |
|
I am having problems getting my PCMCIA WiFi wlan card to work under Gentoo, I use a 3Com 3CRSHPW196 Office Connect card, witch has an Atmel chipset.
I have downloaded and installed a slightly modified version of the Atmelwlan drivers (latest CVS snapshot), the modifications to the source have been made according to this article:
The 3Com 3CRSHPW_96 OfficeConnect Wireless NIC under Linux excuse for a HOWTO
I have gone trough this guide to get my PCMCIA to work:
PCMCIA nic: getting it working with pcmcia-cs (for n00bs!)
I get some strange errors when I'm booting my laptop, an IBM ThinkPad A31:
| Code: | ...
* Mounting local filesystems
cardmgr[2746]: starting, version is 3.2.4
cardmgr[2746]: select(): Bad file descripto
cardmgr[2746]: exiting
* Activating possibly more swap
... |
| Code: | ...
* Starting PCMICA
cardmgr[7327]: watching 2 sockets
cardmgr[7327]: could not adjust resource: IO ports 0xc00-0xcff: Device or resource busy
cardmgr[7327]: could not adjust resource: IO ports 0x800-0x8ff: Device or resource busy
cardmgr[7327]: could not adjust resource: IO ports 0x100-0x4ff: Device or resource busy
cardmgr[7327]: could not adjust resource: memory 0xc0000-0xfffff: Input/output error
cardmgr[7327]: could not adjust resource: memory 0x60000000-0x60ffffff: Input/output error
cardmgr[7327]: could not adjust resource: memory 0xa0000000-0xa0ffffff: Input/output error
cardmgr[7327]: could not adjust resource: IO ports 0xa00-0xaff: Device or resource busy
cardmgr[7327]: starting, version is 3.2.4
cardmgr[7327]: socket 1: 3Com 3CRSHPW_96 Wireless LAN PC Card
cardmgr[7327]: executing: 'modprobe pcmf502r3'
cardmgr[7327]: + /lib/modules/2.4.20-gentoo-r2-hihtest/pcmcia/pcmf502r3.o: init_module: Operation not permitted
cardmgr[7327]: + /lib/modules/2.4.20-gentoo-r2-hihtest/pcmcia/pcmf502r3.o: insmod /lib/modules/2.4.20-gentoo-r2-hihtest/pcmcia/pcmf502r3.o failed
cardmgr[7327]: + /lib/modules/2.4.20-gentoo-r2-hihtest/pcmcia/pcmf502r3.o: insmod pcmf502r3 failed
cardmgr[7327]: + Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
cardmgr[7327]: + You may find more information in syslog or the output from dmesg
cardmgr[7327]: modprobe exited with status 255
cardmgr[7327]: executing: 'insmod /lib/modules/2.4.20-gentoo-r2-hihtest/pcmcia/pcmf502r3.o'
cardmgr[7327]: + /lib/modules/2.4.20-gentoo-r2-hihtest/pcmcia/pcmf502r3.o: init_module: Operation not permitted
cardmgr[7327]: + Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
cardmgr[7327]: + You may find more information in syslog or the output from dmesg
cardmgr[7327]: insmod exited with status 1
cardmgr[7327]: get dev info on socket 1 failed: Resource temporarily unavailable [ ok ]
* Starting SSHD
... |
What have I done wrong?
I have added these portage packages:
pcmcia-cs-drivers
pcmcia-cs
pcmcia-cs-tools
PS!
I don't get any error messages if I do a /etc/init.d/pcmcia restart (wich I did earlier)
ifconfig -a does not show up my wifi card.
Edit:
This is the output of dmsg:
| Code: | ...
unloading PCMCIA Card Services
Linux PCMCIA Card Services 3.2.4
kernel build: 2.4.20-gentoo-r2 unknown
options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Found IRQ 11 for device 02:00.0
PCI: Sharing IRQ 11 with 00:1d.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Found IRQ 11 for device 02:00.1
PCI: Sharing IRQ 11 with 00:1f.3
PCI: Sharing IRQ 11 with 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.6
Ricoh RL5C476 rev 80 PCI-to-CardBus at slot 02:00, mem 0x50000000
host opts [0]: [serial irq] [io 4/6/1] [mem 3/6/1] [pci irq 11] [lat 64/176]
[bus 3/5]
host opts [1]: [serial irq] [io 4/6/1] [mem 3/6/1] [pci irq 11] [lat 64/176]
[bus 6/8]
ISA irqs (<6> PCI irq 9 seems to be wedged!
default) = 3,4,5,7,9,10 PCI status changes
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmf502r3: CardServices release does not match!
pcmf502r3: CardServices release does not match! |
_________________
"Can I blame all of my miss spelling on line noise?" 
Gentoo is my first GNU/Linux Distro, so please bear with me. |
|
| Back to top |
|
 |
FarSide
n00b
Joined: 05 Apr 2003
Posts: 9
|
| Posted: Fri May 02, 2003 12:21 am Post subject: |
|
|
Doesn't anyone have any ideas of what is causing my problem?
_________________
"Can I blame all of my miss spelling on line noise?"
Gentoo is my first GNU/Linux Distro, so please bear with me. |
|
| Back to top |
|
|
arand
Apprentice
Joined: 22 Apr 2003
Posts: 215
|
| Posted: Sat May 03, 2003 11:53 pm Post subject: |
|
|
I don't know if this will help but here is a link to what I did to get my wireless card to work.
https://forums.gentoo.org/viewtopic.php?t=49370&highlight=atmel
I did not see your error similar to yours while I worked on getting mine set up but it might help. The biggest difference between the method I used and the method that you would use would be the options used to when running make config and what module was used.
Ater reading your post again I saw one one thing of interest.
| Quote: |
pcmf502r3: CardServices release does not match!
pcmf502r3: CardServices release does not match! |
I had the same error when I was setting my card up. In the thread listed it shows how to get rid of that error.
Hope this helps. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
