| View previous topic :: View next topic |
| Author |
Message |
elessar2003
n00b
Joined: 17 Mar 2003
Posts: 10
|
 Posted: Mon Mar 17, 2003 9:35 pm Post subject: can't burn cds, please help!! |
 |
|
Hi.
Whenever I try to burn a CD with cdrecord, the recording speed is incredibly higher than the specified speed, and the recording fails.
My recorder is SONY CRX175E2; I have cdrtools-2.0.1-alpha05 (but I have tried the same with previous versions), and cdrdao-1.1.7-r1.
Please, help me if you can. I have searched information on the web, but I haven't got nothing useful. 
_________________
Elendil!! |
|
| Back to top |
|
 |
burzmali
Apprentice
Joined: 18 Apr 2002
Posts: 238
Location: ca
|
| Posted: Mon Mar 17, 2003 11:29 pm Post subject: |
|
|
how are you trying to burn the cd?
have you tried | Code: | | cdrecord -v speed=<speed> dev=<device> driveropts=burnfree |
where <speed> is an integer and <device> is in the form x,y,z that corresponds to the output of cdrecord -scanbus for your writer?
_________________
burzmali
www.burzmali.net |
|
| Back to top |
|
|
elessar2003
n00b
Joined: 17 Mar 2003
Posts: 10
|
| Posted: Mon Mar 17, 2003 11:51 pm Post subject: |
|
|
Yes. I know, at least a bit, how to use cdrecord. I've not tried with this driver option, but i'll do it.
A month ago, I recorded some cds with cdrecord in RedHat without any problems.
Thank you. Namarië.
_________________
Elendil!! |
|
| Back to top |
|
|
elessar2003
n00b
Joined: 17 Mar 2003
Posts: 10
|
| Posted: Mon Mar 17, 2003 11:59 pm Post subject: |
|
|
Ok, I've tried it. The burning process doesn't fails (at least in dummy mode), but the speed isn't the desired.
When I don't add the option burnfree, the result is the following:
| Quote: |
Cdrecord 2.01a05 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX175E2 '
Revision : 'S002'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 697 MB
Total size: 800 MB (79:19.49) = 356962 sectors
Lout start: 801 MB (79:21/37) = 356962 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 7
Is not unrestricted
Is not erasable
ATIP start of lead in: -11597 (97:27/2
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 20
Manufacturer: Princo Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 2887
Forcespeed is OFF.
Starting to write CD/DVD at speed 16 in dummy TAO mode for single session.
Last chance to quit, starting dummy write in 9 seconds.############# 8 seconds.############# 7 seconds.############# 6 seconds.############# 5 seconds.############# 4 seconds.############# 3 seconds.############# 2 seconds.############# 1 seconds.############# 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Starting new track at sector: 0
Track 01: 0 of 697 MB written. Track 01: 1 of 697 MB written (fifo 98%) [buf 80%] 49.6x. Track 01: 2 of 697 MB written (fifo 90%) [buf 93%] 0.9x. Track 01: 3 of 697 MB written (fifo 89%) [buf 69%] 47.0x. Track 01: 4 of 697 MB written (fifo 84%) [buf 52%] 49.2x.
write track data: error after 4888576 bytes
Writing time: 14.555s
Average write speed 327.3x.
Min drive buffer fill was 52%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.004s
|
[/quote]
_________________
Elendil!! |
|
| Back to top |
|
|
|
Kernel & Hardware
