bartaj n00b
Joined: 18 Apr 2005 Posts: 10 Location: Europe/Hungary
|
Posted: Mon Apr 18, 2005 2:48 pm Post subject: Linux on UltraSparc III+ SunFire 280R |
|
|
Hello!
I have a problem with the Gentoo install (sparc64 -> 2005.0/).
I tried to install it on the SunFire 280R (with ultrasparcIII+ proc) hw, but it didn't work.
Can You help me?[/b]
Thanks,
Jani
boot: gentoo-2.4-smp
Loading initial ramdisk....
bootmem_init: Scan sp_banks, init_bootmem(min[0], bootmap[1fc], max[3ff79])
free_bootmem(sp_banks:0): base[0] size[7effe000]
free_bootmem(sp_banks:1): base[7f000000] size[ef2000]
reserve_bootmem(initrd): base[7fdee000] size[e53c9]
reserve_bootmem(initrd): base[7fdee000] size[7fed33c9]
reserve_bootmem(kernel): base[0] size[3f6e90]
reserve_bootmem(bootmap): base[3f8000] size[7ff0]
Remapping the kernel... done.
Booting Linux...
mem_init: Calling free_all_bootmem().
Starting CPU 1... OK
PROMLIB: Sun IEEE Boot Prom 4.5.10 2002/02/11 10:39
Linux version 2.4.29-sparc-smp (root@ayanami) (gcc version 3.3.5 (Gentoo Linux 3.3.5)) #1 SMP Tue Mar 15 18:31:17 UTC 2005
ARCH: SUN4U
Ethernet address: 00:03:ba:16:bf:64
On node 0 totalpages: 261381
zone(0): 262009 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f006e2f0,mid=0)
Found CPU 1 (node=f006ec58,mid=1)
Found 2 CPU prom device tree node(s).
Kernel command line: root=/dev/ram0 init=/linuxrc looptype=squashfs loop=/livecd.squashfs noudev devfs cdroot
Calibrating delay loop... 79.87 BogoMIPS
Memory: 2066416k available (2136k kernel code, 704k data, 176k init) [fffff80000000000,000000007fef2000]
Dentry cache hash table entries: 262144 (order: 9, 4194304 bytes)
Inode cache hash table entries: 131072 (order: 8, 2097152 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 131072 (order: 7, 1048576 bytes)
Page-cache hash table entries: 262144 (order: 8, 2097152 bytes)
POSIX conformance testing by UNIFIX
Entering UltraSMPenguin Mode...
Calibrating delay loop... 599.65 BogoMIPS
Total of 2 processors activated (679.52 BogoMIPS).
CPU 1: synchronized TICK with master CPU (last diff 0 cycles,maxerr 5 cycles)
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
PCI: Probing for controllers.
SCHIZO0 PBMB: ver[5:0], portid 8, cregs[40004400000] pregs[40004700000]
SCHIZO0 PBMB: PCI CFG[7ffee000000] IO[7ffef000000] MEM[7fe00000000]
SCHIZO0 PBMA: ver[5:0], portid 8, cregs[40004400000] pregs[40004600000]
SCHIZO0 PBMA: PCI CFG[7ffec000000] IO[7ffed000000] MEM[7fd00000000]
PCI-IRQ: Routing bus[ 0] slot[ 5] map[0] to INO[1d]
PCI-IRQ: Routing bus[ 0] slot[ 5] map[0] to INO[1f]
PCI-IRQ: Routing bus[ 0] slot[ 6] map[0] to INO[18]
PCI-IRQ: Routing bus[ 0] slot[ 6] map[0] to INO[19]
PCI0(PBMB): Bus running at 33MHz
PCI-IRQ: Routing bus[ 1] slot[ 1] map[0] to INO[00]
PCI-IRQ: Routing bus[ 1] slot[ 4] map[0] to INO[04]
PCI0(PBMA): Bus running at 33MHz
ebus0: [flashprom] [bbc] [power] [i2c -> (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (nvram) (idprom)] [i2c -> (cpu-fru) (temperature) (cpu-fru) (temperature) (fan-control) (motherboard-fru) (ioexp) (ioexp) (ioexp) (fcal-backplane) (remote-system-console) (power-distribution-board) (power-supply) (power-supply) (rscrtc)] [beep] [rtc] [gpio] [pmc] [parallel] [rsc-control] [rsc-console] [serial]
SAB82532 serial driver version 1.65
ttyS00 at 0x7fe7e400000 (irq = 12,222) is a SAB82532 V3.2
ttyS01 at 0x7fe7e400040 (irq = 12,222) is a SAB82532 V3.2
Console: ttyS0 (SAB82532)
power: Control reg at 000007fe7e30002e ... not using powerd.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
chmc0: US3 memory controller at 0000040000400000 [ACTIVE]
chmc1: US3 memory controller at 0000040000c00000 [INACTIVE]
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10f
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem driver Revision: 1.00
ERROR(1): Cheetah error trap taken afsr[0010080000000000] afar[000007ffed0003c0] TL1(0)
ERROR(1): TPC[0000000000538800] TNPC[0000000000538804] TSTATE[0000001180009603]
ERROR(1): M_SYND(0), E_SYND(0), Privileged
ERROR(1): Highest priority error (0000080000000000) "Bus error response from system bus"
ERROR(1): D-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000]
ERROR(1): D-cache data0[0000000000000000] data1[0000000000000000] data2[0000000000000000] data3[0000000000000000]
ERROR(1): I-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000] u[0000000000000000] l[0000000000000000]
ERROR(1): I-cache INSN0[0000000000000000] INSN1[0000000000000000] INSN2[0000000000000000] INSN3[0000000000000000]
ERROR(1): I-cache INSN4[0000000000000000] INSN5[0000000000000000] INSN6[0000000000000000] INSN7[0000000000000000]
ERROR(1): E-cache idx[ed0003c0] tag[0000000001000000]
ERROR(1): E-cache data0[0000000000000000] data1[0000000000000000] data2[0000000000000000] data3[0000000000000000]
Kernel panic: Irrecoverable deferred error trap.
Press L1-A to return to the boot prom
[b] |
|