View previous topic :: View next topic |
Author |
Message |
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Sun Oct 17, 2004 11:34 am Post subject: x11-drm rage mobility [solved] |
|
|
I was posting in a xfree-drm thread, where spyderous was generously helping out, and got it this far, so I thought I'd be nice and bring it to this section, where it belongs. Thanks, everyone, for your assistance.
The base issue is no direct rendering. I don't get any OpenGL errors, but it's be nice to get to use my card, and then have the processor help, rather than have my processor pump out a mean 300fps on glxgears by itself.
xorg.conf: Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_display" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "linear" # [<bool>]
#Option "mmio_cache" # [<bool>]
#Option "test_mmio_cache" # [<bool>]
#Option "panel_display" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI"
BoardName "Rage Mobility P/M AGP 2x"
ChipSet "mach64"
ChipId 0x4c4d
ChipRev 0x64
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection |
startx: Code: | X Window System Version 6.8.0
Release Date: 8 September 2004
X Protocol Version 11, Revision 0, Release 6.8
Build Operating System: Linux 2.4.27 i686 [ELF]
Current Operating System: Linux padawan 2.4.27 #2 Sun Oct 10 11:06:07 Local time zone must be set--see zic manu i686
Build Date: 13 October 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 17 08:14:47 2004
(==) Using config file: "/etc/X11/xorg.conf"
Using vt 7 | It holds here until I shut it down.
glxinfo: Code: | bash-2.05b# glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.1)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x24 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None
0x25 16 tc 0 24 0 r y . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x26 16 tc 0 24 0 r . . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x27 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x28 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None
0x29 16 dc 0 24 0 r y . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x2a 16 dc 0 24 0 r . . 5 6 5 8 0 16 8 16 16 16 16 0 0 None | I can run glxgears, it runs around 300fps on processor power alone, so it appears that things work, but note in line 4 Code: | direct rendering: No |
Logs to follow. _________________ ---Powered by Honda
Last edited by SuperJudge on Sun Oct 24, 2004 6:38 pm; edited 1 time in total |
|
Back to top |
|
|
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Mon Oct 18, 2004 1:07 pm Post subject: |
|
|
Nobody comes here on the weekend? _________________ ---Powered by Honda |
|
Back to top |
|
|
dgently Apprentice
Joined: 29 Jul 2004 Posts: 160
|
Posted: Tue Oct 19, 2004 5:52 am Post subject: |
|
|
Whats in your Xorg.log?
And did you compile xorg-x11 with the "insecure-drivers" USE flag? (it's needed to build the mach64 dri, afaik) If you get an error about not enough memory while accessing the drm module in the Xorg.log, then you have to start X11 with a lower screensize. E.g: I have to run in 800x600 for direct rendering, since my ATI Rage Mobile M only has 4mb |
|
Back to top |
|
|
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Tue Oct 19, 2004 1:21 pm Post subject: |
|
|
Dang, I thought they all had 8MB, that stinks.
Xorg.0.log: Code: | X Window System Version 6.8.0
Release Date: 8 September 2004
X Protocol Version 11, Revision 0, Release 6.8
Build Operating System: Linux 2.4.27 i686 [ELF]
Current Operating System: Linux padawan 2.4.27 #2 Sun Oct 10 11:06:07 Local time
zone must be set--see zic manu i686
Build Date: 13 October 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 19 09:40:50 2004
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x800000f0, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0305 card 104d,80f6 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8305 card ffff,ffff rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 104d,80f6 rev 40 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 104d,80f6 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 104d,80f6 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 104d,80f6 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 104d,80f6 rev 40 class 06,01,00 hdr 00
(II) PCI: 00:07:5: chip 1106,3058 card 104d,80f6 rev 50 class 04,01,00 hdr 00
(II) PCI: 00:07:6: chip 1106,3068 card 104d,80f6 rev 30 class 07,80,00 hdr 00
(II) PCI: 00:0a:0: chip 104c,ac51 card 4000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 104c,ac51 card 4800,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 00:0e:0: chip 104c,8020 card 104d,80f6 rev 00 class 0c,00,10 hdr 00
(II) PCI: 00:10:0: chip 10ec,8139 card 104d,80f6 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c4d card 104d,80f6 rev 64 class 03,00,00 hdr 00
(II) PCI: 06:00:0: chip 168c,0012 card 1186,3a04 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8100000 - 0xe9ffffff (0x1f00000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:4), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x10800000 - 0x10bfffff (0x400000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x10400000 - 0x107fffff (0x400000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (0:10:1), (0,6,9), BCTRL: 0x0500 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[1] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0x11000000 - 0x113fffff (0x400000) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x10c00000 - 0x10ffffff (0x400000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc Rage Mobility P/M AGP 2x rev 100, Mem @ 0
xe9000000/24, 0xe8100000/12, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xeffffff
f
(II) Active PCI resource ranges:
[0] -1 0 0x11000000 - 0x1100ffff (0x10000) MX[B]
[1] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
[2] -1 0 0xe8000000 - 0xe8003fff (0x4000) MX[B]
[3] -1 0 0xe8004000 - 0xe80047ff (0x800) MX[B]
[4] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[5] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B](B)
[6] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
[7] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[8] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[9] -1 0 0x00001c50 - 0x00001c53 (0x4) IX[B]
[10] -1 0 0x00001c54 - 0x00001c57 (0x4) IX[B]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[12] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[13] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]
[14] -1 0 0x00001c40 - 0x00001c4f (0x10) IX[B]
[15] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x11000000 - 0x1100ffff (0x10000) MX[B]
[1] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
[2] -1 0 0xe8000000 - 0xe8003fff (0x4000) MX[B]
[3] -1 0 0xe8004000 - 0xe80047ff (0x800) MX[B]
[4] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[5] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B](B)
[6] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
[7] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[8] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[9] -1 0 0x00001c50 - 0x00001c53 (0x4) IX[B]
[10] -1 0 0x00001c54 - 0x00001c57 (0x4) IX[B]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[12] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[13] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]
[14] -1 0 0x00001c40 - 0x00001c4f (0x10) IX[B]
[15] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x10ffffff (0x10f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x10ffffff (0x10f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x11000000 - 0x1100ffff (0x10000) MX[B]
[6] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
[7] -1 0 0xe8000000 - 0xe8003fff (0x4000) MX[B]
[8] -1 0 0xe8004000 - 0xe80047ff (0x800) MX[B]
[9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[10] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B](B)
[11] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[15] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[16] -1 0 0x00001c50 - 0x00001c53 (0x4) IX[B]
[17] -1 0 0x00001c54 - 0x00001c57 (0x4) IX[B]
[18] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[20] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]
[21] -1 0 0x00001c40 - 0x00001c4f (0x10) IX[B]
[22] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireGL D1100 (RV370) 5B65 (PCIE),
ATI Radeon Mobility M300 (M22) 5460 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
ATI FireGL V7100 (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "Card0".
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active "Device" secti
on "Card0".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x10ffffff (0x10f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x11000000 - 0x1100ffff (0x10000) MX[B]
[6] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
[7] -1 0 0xe8000000 - 0xe8003fff (0x4000) MX[B]
[8] -1 0 0xe8004000 - 0xe80047ff (0x800) MX[B]
[9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[10] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B](B)
[11] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[15] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[16] -1 0 0x00001c50 - 0x00001c53 (0x4) IX[B]
[17] -1 0 0x00001c54 - 0x00001c57 (0x4) IX[B]
[18] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[20] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]
[21] -1 0 0x00001c40 - 0x00001c4f (0x10) IX[B]
[22] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x10ffffff (0x10f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x11000000 - 0x1100ffff (0x10000) MX[B]
[6] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
[7] -1 0 0xe8000000 - 0xe8003fff (0x4000) MX[B]
[8] -1 0 0xe8004000 - 0xe80047ff (0x800) MX[B]
[9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[10] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B](B)
[11] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[18] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[19] -1 0 0x00001c50 - 0x00001c53 (0x4) IX[B]
[20] -1 0 0x00001c54 - 0x00001c57 (0x4) IX[B]
[21] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[22] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[23] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]
[24] -1 0 0x00001c40 - 0x00001c4f (0x10) IX[B]
[25] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) ATI(0): Chipset: "mach64".
(==) ATI(0): Depth 16, (==) framebuffer bpp 16
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 2.0
(II) ATI(0): VESA VBE Total Mem: 8128 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): VESA VBE OEM Software Rev: 1.0
(II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) ATI(0): VESA VBE OEM Product: MACH64RM
(II) ATI(0): VESA VBE OEM Product Rev: 01.00
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): VESA VBE DDC Level none
(II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
(II) ATI(0): VESA VBE DDC read failed
(II) ATI(0): BIOS Data: BIOSSize=0x10000, ROMTable=0x010E.
(II) ATI(0): BIOS Data: ClockTable=0x0A7E, FrequencyTable=0x0A58.
(II) ATI(0): BIOS Data: LCDTable=0x0180, LCDPanelInfo=0xED22.
(II) ATI(0): BIOS Data: VideoTable=0x0000, HardwareTable=0x015E.
(II) ATI(0): BIOS Data: I2CType=0x0F, Tuner=0x00, Decoder=0x00, Audio=0x0F.
(--) ATI(0): ATI 3D Rage Mobility graphics controller detected.
(--) ATI(0): Chip type 4C4D "LM", version 4, foundry TSMC, class 0, revision 0x0
1.
(--) ATI(0): AGP bus interface detected; block I/O base is 0x9000.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 565
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(--) ATI(0): 1024x768 panel (ID 4) detected.
(--) ATI(0): Panel model ADT L141X1-1A.
(--) ATI(0): Panel clock is 65.146 MHz.
(II) ATI(0): Using digital flat panel interface.
(II) ATI(0): Storing hardware cursor image at 0xE97FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xE9000000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xE8100400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xE8100000.
(==) ATI(0): Write-combining range (0xe9000000,0x800000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(II) ATI(0): Engine XCLK 124.453 MHz; Refresh rate code 12.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 29.500 MHz.
(II) ATI(0): Maximum clock: 230.00 MHz
(II) ATI(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "576x432" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x480" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x480" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "896x672" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/double
scan)
(II) ATI(0): Not using default mode "896x672" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "928x696" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/double
scan)
(II) ATI(0): Not using default mode "928x696" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/double
scan)
(II) ATI(0): Not using default mode "960x720" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/double
scan)
(II) ATI(0): Not using default mode "960x720" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1152x768" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "700x525" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "700x525" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/double
scan)
(II) ATI(0): Not using default mode "960x720" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "2048x1536" (bad mode clock/interlace/double
scan)
(II) ATI(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "2048x1536" (bad mode clock/interlace/double
scan)
(II) ATI(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "2048x1536" (bad mode clock/interlace/double
scan)
(II) ATI(0): Not using default mode "1024x768" (exceeds panel dimensions)
(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
(**) ATI(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) ATI(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +
hsync +vsync
(**) ATI(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) ATI(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +
hsync +vsync
(**) ATI(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) ATI(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -
hsync -vsync
(**) ATI(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) ATI(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -
hsync -vsync
(**) ATI(0): *Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) ATI(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 i
nterlace +hsync +vsync
(**) ATI(0): *Built-in mode "Native panel mode": 65.1 MHz, 62.6 kHz, 81.4 Hz
(II) ATI(0): Modeline "Native panel mode" 65.15 1024 1024 1032 1040 768 768
769 770
(**) ATI(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) ATI(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsyn
c -vsync
(**) ATI(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsyn
c +vsync
(**) ATI(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) ATI(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsyn
c +vsync
(**) ATI(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) ATI(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsyn
c +vsync
(**) ATI(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) ATI(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) ATI(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) ATI(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsyn
c +vsync
(**) ATI(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync
-vsync
(**) ATI(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) ATI(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync
-vsync
(**) ATI(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) ATI(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync
-vsync
(**) ATI(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync
-vsync
(**) ATI(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) ATI(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync
+vsync
(**) ATI(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync
+vsync
(**) ATI(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync
-vsync
(**) ATI(0): *Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) ATI(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 double
scan +hsync +vsync
(**) ATI(0): *Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) ATI(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 double
scan +hsync +vsync
(**) ATI(0): *Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) ATI(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 double
scan +hsync +vsync
(**) ATI(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) ATI(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 double
scan -hsync -vsync
(**) ATI(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) ATI(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 double
scan -hsync -vsync
(**) ATI(0): *Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) ATI(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interl
ace doublescan +hsync +vsync
(**) ATI(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) ATI(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 double
scan -hsync -vsync
(**) ATI(0): *Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 double
scan +hsync +vsync
(**) ATI(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) ATI(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 double
scan +hsync +vsync
(**) ATI(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) ATI(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 double
scan +hsync +vsync
(**) ATI(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) ATI(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 double
scan +hsync +vsync
(**) ATI(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) ATI(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 double
scan +hsync +vsync
(**) ATI(0): *Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) ATI(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 double
scan -hsync -vsync
(**) ATI(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) ATI(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 double
scan -hsync -vsync
(**) ATI(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) ATI(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(**) ATI(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) ATI(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 double
scan -hsync -vsync
(**) ATI(0): *Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) ATI(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 double
scan -hsync +vsync
(**) ATI(0): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 double
scan -hsync +vsync
(**) ATI(0): *Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 double
scan +hsync -vsync
(==) ATI(0): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(WW) ATI(0): I2C bus Mach64 initialisation failure.
(II) ATI(0): I2C bus "Mach64" removed.
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe8100000 - 0xe8100fff (0x1000) MS[B]
[1] 0 0 0xe9000000 - 0xe9ffffff (0x1000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x10ffffff (0x10f00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0x11000000 - 0x1100ffff (0x10000) MX[B]
[8] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
[9] -1 0 0xe8000000 - 0xe8003fff (0x4000) MX[B]
[10] -1 0 0xe8004000 - 0xe80047ff (0x800) MX[B]
[11] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[12] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B](B)
[13] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[17] 0 0 0x00009000 - 0x000090ff (0x100) IS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[21] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[22] -1 0 0x00001c50 - 0x00001c53 (0x4) IX[B]
[23] -1 0 0x00001c54 - 0x00001c57 (0x4) IX[B]
[24] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[25] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[26] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]
[27] -1 0 0x00001c40 - 0x00001c4f (0x10) IX[B]
[28] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) ATI(0): Write-combining range (0xe9000000,0x800000)
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 1024 x 3327 rectangle at 0,768
(II) ATI(0): 512 x 3328 rectangle at 0,768
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
6 512x512 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/mouse"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse0: Buttons: 3
(**) Mouse0: SmartScroll: 1
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse0: Buttons: 3
(**) Mouse0: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard0: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "PS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded | If something overlaps, it's because I had to get the log from ssh using less. _________________ ---Powered by Honda |
|
Back to top |
|
|
dgently Apprentice
Joined: 29 Jul 2004 Posts: 160
|
Posted: Tue Oct 19, 2004 2:31 pm Post subject: |
|
|
SuperJudge wrote: |
Code: |
(==) ATI(0): Write-combining range (0xe9000000,0x800000)
(II) ATI(0): Largest offscreen areas (with overlaps):
|
|
Between these lines is a large block of messages about dri and drm in my log. Are you sure you compiled xorg-x11 with "insecure-driver" for the dri stuff? (the rest of log looks fine)
SuperJudge wrote: |
If something overlaps, it's because I had to get the log from ssh using less. |
why not copy with scp or sftp? |
|
Back to top |
|
|
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Tue Oct 19, 2004 4:01 pm Post subject: |
|
|
I actually didn't
I'm remerging with that in make.conf and I'll try it again.
How would I use scp to copy it? _________________ ---Powered by Honda |
|
Back to top |
|
|
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Tue Oct 19, 2004 10:35 pm Post subject: |
|
|
Nothing changed. No acceleration. Spyderous was, at first, certain that I had to use the atimisc driver, but it didn't work. Before I posted my log, I tried startx using atimisc, and mach64 as the driver, and neither worked. Does anybody else have the Mobility P/M that got this thing to work?
I think I might also add some of those modelines to xorg.conf so it doesn't have to scan for them.
Xorg.0.log: Code: | X Window System Version 6.8.0
Release Date: 8 September 2004
X Protocol Version 11, Revision 0, Release 6.8
Build Operating System: Linux 2.4.27 i686 [ELF]
Current Operating System: Linux padawan 2.4.27 #2 Sun Oct 10 11:06:07 Local time zone must be set--see zic manu i686
Build Date: 13 October 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 19 19:22:17 2004
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(**) Extension "Composite" is enabled
(**) Extension "RENDER" is enabled
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0305 card 104d,80f6 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8305 card ffff,ffff rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 104d,80f6 rev 40 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 104d,80f6 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 104d,80f6 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 104d,80f6 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 104d,80f6 rev 40 class 06,01,00 hdr 00
(II) PCI: 00:07:5: chip 1106,3058 card 104d,80f6 rev 50 class 04,01,00 hdr 00
(II) PCI: 00:07:6: chip 1106,3068 card 104d,80f6 rev 30 class 07,80,00 hdr 00
(II) PCI: 00:0a:0: chip 104c,ac51 card 4000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 104c,ac51 card 4800,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 00:0e:0: chip 104c,8020 card 104d,80f6 rev 00 class 0c,00,10 hdr 00
(II) PCI: 00:10:0: chip 10ec,8139 card 104d,80f6 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c4d card 104d,80f6 rev 64 class 03,00,00 hdr 00
(II) PCI: 06:00:0: chip 168c,0012 card 1186,3a04 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8100000 - 0xe9ffffff (0x1f00000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:4), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x10800000 - 0x10bfffff (0x400000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x10400000 - 0x107fffff (0x400000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (0:10:1), (0,6,9), BCTRL: 0x0500 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00004800 - 0x000048ff (0x100) IX[B]
[1] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0x11000000 - 0x113fffff (0x400000) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x10c00000 - 0x10ffffff (0x400000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc Rage Mobility P/M AGP 2x rev 100, Mem @ 0xe9000000/24, 0xe8100000/12, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
(II) Active PCI resource ranges:
[0] -1 0 0x11000000 - 0x1100ffff (0x10000) MX[B]
[1] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
[2] -1 0 0xe8000000 - 0xe8003fff (0x4000) MX[B]
[3] -1 0 0xe8004000 - 0xe80047ff (0x800) MX[B]
[4] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[5] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B](B)
[6] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
[7] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[8] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[9] -1 0 0x00001c50 - 0x00001c53 (0x4) IX[B]
[10] -1 0 0x00001c54 - 0x00001c57 (0x4) IX[B]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[12] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[13] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]
[14] -1 0 0x00001c40 - 0x00001c4f (0x10) IX[B]
[15] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x11000000 - 0x1100ffff (0x10000) MX[B]
[1] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
[2] -1 0 0xe8000000 - 0xe8003fff (0x4000) MX[B]
[3] -1 0 0xe8004000 - 0xe80047ff (0x800) MX[B]
[4] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[5] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B](B)
[6] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
[7] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[8] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[9] -1 0 0x00001c50 - 0x00001c53 (0x4) IX[B]
[10] -1 0 0x00001c54 - 0x00001c57 (0x4) IX[B]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[12] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[13] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]
[14] -1 0 0x00001c40 - 0x00001c4f (0x10) IX[B]
[15] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x10ffffff (0x10f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x10ffffff (0x10f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x11000000 - 0x1100ffff (0x10000) MX[B]
[6] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
[7] -1 0 0xe8000000 - 0xe8003fff (0x4000) MX[B]
[8] -1 0 0xe8004000 - 0xe80047ff (0x800) MX[B]
[9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[10] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B](B)
[11] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[15] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[16] -1 0 0x00001c50 - 0x00001c53 (0x4) IX[B]
[17] -1 0 0x00001c54 - 0x00001c57 (0x4) IX[B]
[18] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[20] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]
[21] -1 0 0x00001c40 - 0x00001c4f (0x10) IX[B]
[22] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireGL D1100 (RV370) 5B65 (PCIE),
ATI Radeon Mobility M300 (M22) 5460 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
ATI FireGL V7100 (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "Card0".
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active "Device" section "Card0".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x10ffffff (0x10f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x11000000 - 0x1100ffff (0x10000) MX[B]
[6] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
[7] -1 0 0xe8000000 - 0xe8003fff (0x4000) MX[B]
[8] -1 0 0xe8004000 - 0xe80047ff (0x800) MX[B]
[9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[10] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B](B)
[11] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[15] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[16] -1 0 0x00001c50 - 0x00001c53 (0x4) IX[B]
[17] -1 0 0x00001c54 - 0x00001c57 (0x4) IX[B]
[18] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[20] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]
[21] -1 0 0x00001c40 - 0x00001c4f (0x10) IX[B]
[22] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x10ffffff (0x10f00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x11000000 - 0x1100ffff (0x10000) MX[B]
[6] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
[7] -1 0 0xe8000000 - 0xe8003fff (0x4000) MX[B]
[8] -1 0 0xe8004000 - 0xe80047ff (0x800) MX[B]
[9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[10] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B](B)
[11] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[18] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[19] -1 0 0x00001c50 - 0x00001c53 (0x4) IX[B]
[20] -1 0 0x00001c54 - 0x00001c57 (0x4) IX[B]
[21] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[22] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[23] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]
[24] -1 0 0x00001c40 - 0x00001c4f (0x10) IX[B]
[25] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) ATI(0): Chipset: "mach64".
(==) ATI(0): Depth 16, (==) framebuffer bpp 16
(**) ATI(0): Option "accel"
(**) ATI(0): Option "panel_display"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 2.0
(II) ATI(0): VESA VBE Total Mem: 8128 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): VESA VBE OEM Software Rev: 1.0
(II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) ATI(0): VESA VBE OEM Product: MACH64RM
(II) ATI(0): VESA VBE OEM Product Rev: 01.00
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): VESA VBE DDC Level none
(II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
(II) ATI(0): VESA VBE DDC read failed
(II) ATI(0): BIOS Data: BIOSSize=0x10000, ROMTable=0x010E.
(II) ATI(0): BIOS Data: ClockTable=0x0A7E, FrequencyTable=0x0A58.
(II) ATI(0): BIOS Data: LCDTable=0x0180, LCDPanelInfo=0xED22.
(II) ATI(0): BIOS Data: VideoTable=0x0000, HardwareTable=0x015E.
(II) ATI(0): BIOS Data: I2CType=0x0F, Tuner=0x00, Decoder=0x00, Audio=0x0F.
(--) ATI(0): ATI 3D Rage Mobility graphics controller detected.
(--) ATI(0): Chip type 4C4D "LM", version 4, foundry TSMC, class 0, revision 0x01.
(--) ATI(0): AGP bus interface detected; block I/O base is 0x9000.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 565
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(--) ATI(0): 1024x768 panel (ID 4) detected.
(--) ATI(0): Panel model ADT L141X1-1A.
(--) ATI(0): Panel clock is 65.146 MHz.
(II) ATI(0): Using digital flat panel interface.
(II) ATI(0): Storing hardware cursor image at 0xE97FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xE9000000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xE8100400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xE8100000.
(==) ATI(0): Write-combining range (0xe9000000,0x800000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(II) ATI(0): Engine XCLK 124.453 MHz; Refresh rate code 12.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 29.500 MHz.
(II) ATI(0): Maximum clock: 230.00 MHz
(II) ATI(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "576x432" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x480" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x480" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "896x672" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "896x672" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "928x696" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "928x696" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "960x720" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "960x720" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1152x768" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "700x525" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "700x525" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "960x720" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1024x768" (exceeds panel dimensions)
(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
(**) ATI(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) ATI(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) ATI(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) ATI(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) ATI(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) ATI(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) ATI(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) ATI(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) ATI(0): *Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) ATI(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
(**) ATI(0): *Built-in mode "Native panel mode": 65.1 MHz, 62.6 kHz, 81.4 Hz
(II) ATI(0): Modeline "Native panel mode" 65.15 1024 1024 1032 1040 768 768 769 770
(**) ATI(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) ATI(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) ATI(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) ATI(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) ATI(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) ATI(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) ATI(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) ATI(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) ATI(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) ATI(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) ATI(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) ATI(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) ATI(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) ATI(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) ATI(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) ATI(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) ATI(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) ATI(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) ATI(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) ATI(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) ATI(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) ATI(0): *Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) ATI(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) ATI(0): *Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) ATI(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync
(**) ATI(0): *Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) ATI(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) ATI(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) ATI(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) ATI(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) ATI(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) ATI(0): *Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) ATI(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
(**) ATI(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) ATI(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) ATI(0): *Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) ATI(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) ATI(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) ATI(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) ATI(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) ATI(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) ATI(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) ATI(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) ATI(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) ATI(0): *Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) ATI(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync
(**) ATI(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) ATI(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
(**) ATI(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) ATI(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(**) ATI(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) ATI(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(**) ATI(0): *Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) ATI(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync
(**) ATI(0): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync
(**) ATI(0): *Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync
(==) ATI(0): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(WW) ATI(0): I2C bus Mach64 initialisation failure.
(II) ATI(0): I2C bus "Mach64" removed.
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe8100000 - 0xe8100fff (0x1000) MS[B]
[1] 0 0 0xe9000000 - 0xe9ffffff (0x1000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x10ffffff (0x10f00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0x11000000 - 0x1100ffff (0x10000) MX[B]
[8] -1 0 0xe8004800 - 0xe80048ff (0x100) MX[B]
[9] -1 0 0xe8000000 - 0xe8003fff (0x4000) MX[B]
[10] -1 0 0xe8004000 - 0xe80047ff (0x800) MX[B]
[11] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[12] -1 0 0xe8100000 - 0xe8100fff (0x1000) MX[B](B)
[13] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[17] 0 0 0x00009000 - 0x000090ff (0x100) IS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[21] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[22] -1 0 0x00001c50 - 0x00001c53 (0x4) IX[B]
[23] -1 0 0x00001c54 - 0x00001c57 (0x4) IX[B]
[24] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[25] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[B]
[26] -1 0 0x00001c00 - 0x00001c1f (0x20) IX[B]
[27] -1 0 0x00001c40 - 0x00001c4f (0x10) IX[B]
[28] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) ATI(0): Write-combining range (0xe9000000,0x800000)
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 1024 x 3327 rectangle at 0,768
(II) ATI(0): 512 x 3328 rectangle at 0,768
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
6 512x512 slots
(**) ATI(0): Option "BackingStore" "true"
(**) ATI(0): Backing store enabled
(==) ATI(0): Silken mouse enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/mouse"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse0: Buttons: 3
(**) Mouse0: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard0: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "PS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded |
_________________ ---Powered by Honda |
|
Back to top |
|
|
svenc n00b
Joined: 06 Apr 2003 Posts: 33
|
Posted: Wed Oct 20, 2004 1:46 am Post subject: Please post output of "etcat -u xorg-x11"... |
|
|
as I agree with dgently that there should be additional lines between the following of your Xorg.0.log
Code: | (==) ATI(0): Write-combining range (0xe9000000,0x800000)
(II) ATI(0): Largest offscreen areas (with overlaps): |
scp is cp with host prepended to path/file Code: | scp host:/var/log/Xorg.0.log ~/log_from_host.txt |
see manpage
Sven |
|
Back to top |
|
|
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Wed Oct 20, 2004 2:58 am Post subject: |
|
|
Well, I think the problem is less that the lines aren't there, and more "how do I get those lines there?" _________________ ---Powered by Honda |
|
Back to top |
|
|
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Wed Oct 20, 2004 6:00 am Post subject: |
|
|
I decided to give one of the newer DRM howto's a try, and got it working Thanks.
https://forums.gentoo.org/viewtopic.php?t=206675&highlight=radeon+howto
glxinfo: Code: | name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_SGI_video_sync, GLX_SGIS_multisample
OpenGL vendor string: Gareth Hughes, Leif Delgass, José Fonseca
OpenGL renderer string: Mesa DRI Mach64 [Rage Pro] 20030502 AGP 2x x86/MMX+/3DNow!+/SSE
OpenGL version string: 1.2 Mesa 6.3
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_transpose_matrix,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_histogram, GL_EXT_packed_pixels,
GL_EXT_polygon_offset, GL_EXT_rescale_normal,
GL_EXT_separate_specular_color, GL_EXT_subtexture, GL_EXT_texture,
GL_EXT_texture3D, GL_EXT_texture_edge_clamp, GL_EXT_texture_object,
GL_EXT_vertex_array, GL_APPLE_packed_pixels, GL_IBM_rasterpos_clip,
GL_MESA_ycbcr_texture, GL_MESA_window_pos, GL_NV_light_max_exponent,
GL_NV_texgen_reflection, GL_OES_read_format, GL_SGI_color_matrix,
GL_SGI_color_table, GL_SGIS_generate_mipmap, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 16 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x24 16 tc 0 16 0 r . . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x25 16 tc 0 16 0 r . . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x26 16 tc 0 16 0 r . . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x27 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x28 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x29 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x2a 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x2b 16 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x2c 16 dc 0 16 0 r . . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x2d 16 dc 0 16 0 r . . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x2e 16 dc 0 16 0 r . . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x2f 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x30 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x31 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x32 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x47 32 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
|
edit: added link to post that helped me fix the issue. _________________ ---Powered by Honda |
|
Back to top |
|
|
Axklor n00b
Joined: 22 May 2003 Posts: 61 Location: Wollongong, NSW, Australia
|
Posted: Sun Nov 07, 2004 12:52 am Post subject: |
|
|
I have a toshiba Satellite 30CDT with a Rage Mobility P/M AGP 2x 4mb, Celeron 500M.
running 2.6.8 and xorg 6.8.1 gives me ~94fps on glxgears, direct rendering disabled (due to not enough memory at 1024x768).
for this reason i took gentoo off the lappy, but would be quite welcome to put it back on if someone would confirm a substantial rise in fps if i could get direct rendering working.
Thanks |
|
Back to top |
|
|
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Sun Nov 07, 2004 2:27 pm Post subject: |
|
|
Axklor wrote: | I have a toshiba Satellite 30CDT with a Rage Mobility P/M AGP 2x 4mb, Celeron 500M.
running 2.6.8 and xorg 6.8.1 gives me ~94fps on glxgears, direct rendering disabled (due to not enough memory at 1024x768).
for this reason i took gentoo off the lappy, but would be quite welcome to put it back on if someone would confirm a substantial rise in fps if i could get direct rendering working.
Thanks | Interesting you mention that. I only get ~200fps on glxgears, but it's strictly using my video card, and the video card doesn't render glxgears that fast, but I can play Tuxracer just fine, it runs it at roughly around 60fps or more, so it's perfectly fine.
As far as your resolution issues, did it render at 800x600 or 640x480? You're not going to play games on a 4 meg card in 1024x768 for sure. I'd try seeing if you could switch resolutions to use drm/dri. _________________ ---Powered by Honda |
|
Back to top |
|
|
Cr0t l33t
Joined: 27 Apr 2002 Posts: 944 Location: USA
|
Posted: Sun Nov 07, 2004 6:24 pm Post subject: |
|
|
the mach64 chipset is a piece-o-shiznet, because that card got never released with enough Video RAM. I would like to meet one of the laptop devel. people and ask them, why they only but 4 or 8MB on those Video Cards. I have 8MB in my 1GHz laptop and at 1400x1050 I get no DRI.
For me it doesn't really make a diff. cause I don't play games, but I know that some people like to play games. Besides the point that you can't get DRI to fire up because you don't have enough video ram... you should focus back and say to yourself it's a shitty video card anyway =) _________________ cya |
|
Back to top |
|
|
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Fri Nov 12, 2004 12:33 pm Post subject: |
|
|
Cr0t wrote: | the mach64 chipset is a piece-o-shiznet, because that card got never released with enough Video RAM. I would like to meet one of the laptop devel. people and ask them, why they only but 4 or 8MB on those Video Cards. I have 8MB in my 1GHz laptop and at 1400x1050 I get no DRI.
For me it doesn't really make a diff. cause I don't play games, but I know that some people like to play games. Besides the point that you can't get DRI to fire up because you don't have enough video ram... you should focus back and say to yourself it's a shitty video card anyway =) | I wouldn't expect a forum guru to say something like that. It's OT and argumentative.
I got mine to work, and it was worth it, even though it's only an 8MB card. It makes a difference in UT, and I can play TuxRacer, Cannonsmash, and a lot of other games. It makes a difference to me with this shitty card. _________________ ---Powered by Honda |
|
Back to top |
|
|
albright Advocate
Joined: 16 Nov 2003 Posts: 2588 Location: Near Toronto
|
Posted: Fri Nov 12, 2004 4:35 pm Post subject: clarification |
|
|
Hi. Yes, it's fun to get stuff like that working ...
One little question: when you followed the howto which you
link to above, you used the common and mach64 packages
(not the radeon package). right? |
|
Back to top |
|
|
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Mon Nov 15, 2004 4:12 pm Post subject: Re: clarification |
|
|
albright wrote: | One little question: when you followed the howto which you
link to above, you used the common and mach64 packages
(not the radeon package). right? | Absolutely, I have a mach64 based Rage Mobility P/M card, I had to use the common and mach64 branches. Make sure you read further down, because when he posted the HowTo, he put the branches in the wrong order. You unzip the common, then the mach64.
Good luck. _________________ ---Powered by Honda |
|
Back to top |
|
|
albright Advocate
Joined: 16 Nov 2003 Posts: 2588 Location: Near Toronto
|
Posted: Mon Nov 15, 2004 4:52 pm Post subject: no joy |
|
|
I tried the common+mach64 and everything seemed to
work (the mach64 module was created and could be
insmoded). But X would not start and locked up the computer.
Had to recompile xfree.
Might I ask which packages you used (they seem to name them
by date) and which version of xfree or xorg you use.
I've tried xorg 6.7 (6.8 won't work with ati cards) and noticed that
I get only about 55 fps in glxgears (with no dri of course), whereas
I get about 150 fps with xfree 4.3 (still with no dri).
(this is a P3 600 acer notebook)
Anyway, if you have more advice, I need it |
|
Back to top |
|
|
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Mon Nov 15, 2004 5:58 pm Post subject: Re: no joy |
|
|
albright wrote: | Might I ask which packages you used (they seem to name them by date) and which version of xfree or xorg you use.
I've tried xorg 6.7 (6.8 won't work with ati cards) and noticed that
I get only about 55 fps in glxgears (with no dri of course), whereas
I get about 150 fps with xfree 4.3 (still with no dri).
(this is a P3 600 acer notebook)
Anyway, if you have more advice, I need it | I use xorg-x11-6.8.0-r1.
I got the common and mach64 packages about the 17th of October, so I'm guessing those were the current releases as of that date.
The kernel I use is gentoo-dev-sources-2.6.7-r14.
I get about 180fps on glxgears with this xorg release, but games run as smooth as you'd expect them to in windows with the same card, so it works out in the end. If you need to we can go through it step by step, I'd be happy to help out. _________________ ---Powered by Honda |
|
Back to top |
|
|
albright Advocate
Joined: 16 Nov 2003 Posts: 2588 Location: Near Toronto
|
Posted: Tue Nov 16, 2004 7:46 pm Post subject: |
|
|
I'll have to give it another try (too bad it takes about four hours
to compile X on my notebook).
Did you have xorg 6.8 working *before* you applied the dri
stuff? Because the 6.8 x-server just would not start for me
and locked up the computer ... |
|
Back to top |
|
|
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Wed Nov 17, 2004 6:32 pm Post subject: |
|
|
albright wrote: | I'll have to give it another try (too bad it takes about four hours
to compile X on my notebook).
Did you have xorg 6.8 working *before* you applied the dri
stuff? Because the 6.8 x-server just would not start for me
and locked up the computer ... | I had 6.8 before I applied the dri patches. Here's what my xorg.conf looks like. Code: | Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Modeline "Native panel mode" 65.15 1024 1024 1032 1040 768 768 769 770
EndSection
Section "Device"
Identifier "Card0"
Driver "ati"
VendorName "ATI"
BoardName "Rage Mobility P/M AGP 2x"
ChipSet "mach64"
ChipId 0x4c4d
ChipRev 0x64
BusID "PCI:1:0:0"
VideoRam 8139
Option "Backingstore" "True"
Option "Accel"
Option "AGPMode" "2"
#Option "EnablePageFlip" "True" #
#Option "DMAMode" "mmio" #
#Option "AGPFastWrite" "True" #
#Option "composite_sync" #
#Option "linear" #
#Option "mmio_cache" #
#Option "test_mmio_cache" #
#Option "panel_display" #
#Option "reference_clock" #
#Option "shadow_fb" #
#Option "sw_cursor" #
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
Section "DRI"
Mode 0666
EndSection
|
You could probably comment out the modeline in the monitor section, and it'll just run using whatever resolutions it can get to respond properly. _________________ ---Powered by Honda |
|
Back to top |
|
|
Axklor n00b
Joined: 22 May 2003 Posts: 61 Location: Wollongong, NSW, Australia
|
Posted: Mon Nov 29, 2004 3:43 am Post subject: |
|
|
I've set up xorg 6.8-r1 with the snapshots from freedesktop.org
my xorg.conf is very similar to SuperJudge's above.
But i am having no such luck changing resolutions or colour depth
even when using:
Code: | SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection |
would this be the laptops inability to change display size and depths, or maybe the panels horizontal and vertical properties in my xorg.conf? |
|
Back to top |
|
|
SuperJudge Apprentice
Joined: 08 Jun 2004 Posts: 177 Location: Albany, GA
|
Posted: Tue Nov 30, 2004 12:35 pm Post subject: |
|
|
Axklor wrote: | I've set up xorg 6.8-r1 with the snapshots from freedesktop.org
my xorg.conf is very similar to SuperJudge's above.
But i am having no such luck changing resolutions or colour depth
even when using:
Code: | SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection |
would this be the laptops inability to change display size and depths, or maybe the panels horizontal and vertical properties in my xorg.conf? |
That won't restrict the panel size, but it will restrict the depth to 8 bits per pixel. You should try adding similar subsections below it with Depth 16 and Depth 24. Code: | SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection |
Then I added the "Native panel mode" line from /var/log/Xorg.0.log to my xorg.conf file to tell it what resolutions to use. Code: | Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Modeline "Native panel mode" 65.15 1024 1024 1032 [wrapped from previous line]1040 768 768 769 770
EndSection
|
_________________ ---Powered by Honda |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|