Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Direct rendering (DRI) using X11-DRM HOWTO
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next  
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks
View previous topic :: View next topic  
Author Message
SuperJudge
Apprentice
Apprentice


Joined: 08 Jun 2004
Posts: 177
Location: Albany, GA

PostPosted: Tue Oct 12, 2004 11:45 am    Post subject: Reply with quote

I installed x11-drm and put agpgart and mach64 in modules.autoload.d, but I get a similar error to a lot of people when loading off of an xorg.conf with Driver "mach64".

Does 'emerge x11-drm' overwrite the previous existing modules? I wonder why X says they don't exist when they clearly do. Xorg.conf isn't looking in the wrong path for the module, is it?
_________________
---Powered by Honda
Back to top
View user's profile Send private message
dberkholz
Developer
Developer


Joined: 18 Mar 2003
Posts: 1008
Location: Minneapolis, MN, USA

PostPosted: Wed Oct 13, 2004 10:12 pm    Post subject: Reply with quote

SuperJudge wrote:
I installed x11-drm and put agpgart and mach64 in modules.autoload.d, but I get a similar error to a lot of people when loading off of an xorg.conf with Driver "mach64".

Does 'emerge x11-drm' overwrite the previous existing modules? I wonder why X says they don't exist when they clearly do. Xorg.conf isn't looking in the wrong path for the module, is it?

Don't put mach64 as the driver in xorg.conf, put atimisc.
Back to top
View user's profile Send private message
SuperJudge
Apprentice
Apprentice


Joined: 08 Jun 2004
Posts: 177
Location: Albany, GA

PostPosted: Thu Oct 14, 2004 11:19 pm    Post subject: Reply with quote

spyderous wrote:
SuperJudge wrote:
I installed x11-drm and put agpgart and mach64 in modules.autoload.d, but I get a similar error to a lot of people when loading off of an xorg.conf with Driver "mach64".

Does 'emerge x11-drm' overwrite the previous existing modules? I wonder why X says they don't exist when they clearly do. Xorg.conf isn't looking in the wrong path for the module, is it?

Don't put mach64 as the driver in xorg.conf, put atimisc.
I have VIDEO_CARDS="mach64" right now, should I leave that and just change the driver to atimisc, or should I change V_C= to atimisc, remerge x11-drm, add atimisc to modules.autoload.d and change the driver to atimisc? Add in anything else I may have missed, and thanks for the attention to the issue, I appreciate it.
_________________
---Powered by Honda
Back to top
View user's profile Send private message
dberkholz
Developer
Developer


Joined: 18 Mar 2003
Posts: 1008
Location: Minneapolis, MN, USA

PostPosted: Thu Oct 14, 2004 11:28 pm    Post subject: Reply with quote

SuperJudge wrote:
I have VIDEO_CARDS="mach64" right now, should I leave that and just change the driver to atimisc, or should I change V_C= to atimisc, remerge x11-drm, add atimisc to modules.autoload.d and change the driver to atimisc? Add in anything else I may have missed, and thanks for the attention to the issue, I appreciate it.

The x11-drm module is called mach64. The X driver is called atimisc.
Back to top
View user's profile Send private message
SuperJudge
Apprentice
Apprentice


Joined: 08 Jun 2004
Posts: 177
Location: Albany, GA

PostPosted: Fri Oct 15, 2004 1:02 pm    Post subject: Reply with quote

spyderous wrote:
The x11-drm module is called mach64. The X driver is called atimisc.
I did notice it's call x11-drm now, should I be using xorg or xfree? Or are either fine?
_________________
---Powered by Honda
Back to top
View user's profile Send private message
dberkholz
Developer
Developer


Joined: 18 Mar 2003
Posts: 1008
Location: Minneapolis, MN, USA

PostPosted: Fri Oct 15, 2004 2:52 pm    Post subject: Reply with quote

SuperJudge wrote:
spyderous wrote:
The x11-drm module is called mach64. The X driver is called atimisc.
I did notice it's call x11-drm now, should I be using xorg or xfree? Or are either fine?

I'd use xorg. xfree is old and deprecated.
Back to top
View user's profile Send private message
SuperJudge
Apprentice
Apprentice


Joined: 08 Jun 2004
Posts: 177
Location: Albany, GA

PostPosted: Fri Oct 15, 2004 5:39 pm    Post subject: Reply with quote

I'm glad I did something right. I doublechecked make.conf and xorg.conf and remerge x11-drm just for S&G. I'm not sure if there's supposed to be an atimisc modules but here's some info about the situation.

/etc/X11/xorg.conf:
Code:
Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        ModulePath   "/usr/X11R6/lib/modules"
        FontPath     "/usr/share/fonts/misc/"
        FontPath     "/usr/share/fonts/TTF/"
        FontPath     "/usr/share/fonts/Type1/"
        FontPath     "/usr/share/fonts/CID/"
        FontPath     "/usr/share/fonts/75dpi/"
        FontPath     "/usr/share/fonts/100dpi/"
EndSection

Section "Module"
        Load  "dbe"
        Load  "dri"
        Load  "extmod"
        Load  "glx"
        Load  "record"
        Load  "xtrap"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/mouse"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "accel"                     # [<bool>]
        #Option     "crt_display"               # [<bool>]
        #Option     "composite_sync"            # [<bool>]
        #Option     "hw_cursor"                 # [<bool>]
        #Option     "linear"                    # [<bool>]
        #Option     "mmio_cache"                # [<bool>]
        #Option     "test_mmio_cache"           # [<bool>]
        #Option     "panel_display"             # [<bool>]
        #Option     "probe_clocks"              # [<bool>]
        #Option     "reference_clock"           # <freq>
        #Option     "shadow_fb"                 # [<bool>]
        #Option     "sw_cursor"                 # [<bool>]
        Identifier  "Card0"
        Driver      "atimisc"
        VendorName  "ATI"
        BoardName   "Rage Mobility P/M AGP 2x"
        ChipSet     "ati"
        ChipId      0x4c4d
        ChipRev     0x64
        BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection


startx output:
Code:
X Window System Version 6.8.0
Release Date: 8 September 2004
X Protocol Version 11, Revision 0, Release 6.8
Build Operating System: Linux 2.4.27 i686 [ELF]
Current Operating System: Linux padawan 2.4.27 #2 Sun Oct 10 11:06:07 Local time zone must be set--see zic manu i686
Build Date: 13 October 2004
        Before reporting problems, check http://wiki.X.Org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 13:25:50 2004
(==) Using config file: "/etc/X11/xorg.conf"
Using vt 7
(EE) No devices detected.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
         at http://wiki.X.Org
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.


Is there supposed to be an atimisc module?
_________________
---Powered by Honda
Back to top
View user's profile Send private message
dberkholz
Developer
Developer


Joined: 18 Mar 2003
Posts: 1008
Location: Minneapolis, MN, USA

PostPosted: Fri Oct 15, 2004 6:53 pm    Post subject: Reply with quote

That's odd. Try replacing atimisc with ati in your xorg.conf.
Back to top
View user's profile Send private message
SuperJudge
Apprentice
Apprentice


Joined: 08 Jun 2004
Posts: 177
Location: Albany, GA

PostPosted: Fri Oct 15, 2004 10:07 pm    Post subject: Reply with quote

I just tried that on ssh, and it didn't error out, at least. I'll check glxgears when I get home. Thanks a lot.
_________________
---Powered by Honda
Back to top
View user's profile Send private message
SuperJudge
Apprentice
Apprentice


Joined: 08 Jun 2004
Posts: 177
Location: Albany, GA

PostPosted: Sat Oct 16, 2004 12:51 am    Post subject: Reply with quote

Bingo, ati did it. Why did ati work and not mach64? I figured that was the driver. I'm guessing that the ati driver loads the mach64 module?

It runs glxgears marginally faster than the processor does (AthXP 1500+) but it's great that it doesn't weigh down the processor anymore.

Are there any optimization lines I can add to xorg.conf for my card to help it run more efficiently?
Code:
bash-2.05b# glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
    GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.1)
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
    GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
    GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
    GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
    GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
    GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
    GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
    GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
    GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
    GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
    GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
    GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
    GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
    GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
    GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x24 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 None
0x25 16 tc  0 24  0 r  y  .  5  6  5  8  0 16  8 16 16 16 16  0 0 None
0x26 16 tc  0 24  0 r  .  .  5  6  5  8  0 16  8 16 16 16 16  0 0 None
0x27 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x28 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 None
0x29 16 dc  0 24  0 r  y  .  5  6  5  8  0 16  8 16 16 16 16  0 0 None
0x2a 16 dc  0 24  0 r  .  .  5  6  5  8  0 16  8 16 16 16 16  0 0 None

_________________
---Powered by Honda
Back to top
View user's profile Send private message
dberkholz
Developer
Developer


Joined: 18 Mar 2003
Posts: 1008
Location: Minneapolis, MN, USA

PostPosted: Sat Oct 16, 2004 4:36 am    Post subject: Reply with quote

SuperJudge wrote:
Bingo, ati did it. Why did ati work and not mach64? I figured that was the driver. I'm guessing that the ati driver loads the mach64 module?

ati driver is a wrapper for all the ati card drivers. It detects and autoloads the proper one. I have no idea why, but sometimes mach64 only seems to work with the wrapper.

Quote:
Are there any optimization lines I can add to xorg.conf for my card to help it run more efficiently?

Check the Direct Rendering Guide on Gentoo docs.
Back to top
View user's profile Send private message
SuperJudge
Apprentice
Apprentice


Joined: 08 Jun 2004
Posts: 177
Location: Albany, GA

PostPosted: Sat Oct 16, 2004 10:04 pm    Post subject: Reply with quote

Thanks a lot, spyderous, I've been trying for ages to get drm working with this laptop :)

Thanks to everybody, I know at times it takes a lot to deal with those who don't know what they're doing and I'm sure others appreciate your patience.
_________________
---Powered by Honda
Back to top
View user's profile Send private message
SuperJudge
Apprentice
Apprentice


Joined: 08 Jun 2004
Posts: 177
Location: Albany, GA

PostPosted: Sun Oct 17, 2004 4:17 am    Post subject: Reply with quote

Code:
direct rendering: No
I just noticed this from my previous post, while going through the Direct Rendering in the docs. It isn't working. The glxgears results flux, when I let it go, it just averages about 300fps.

If it's a problem me posting here, I can start a new thread, I really appreciate all your assistance.
_________________
---Powered by Honda
Back to top
View user's profile Send private message
dberkholz
Developer
Developer


Joined: 18 Mar 2003
Posts: 1008
Location: Minneapolis, MN, USA

PostPosted: Sun Oct 17, 2004 4:59 am    Post subject: Reply with quote

SuperJudge wrote:
If it's a problem me posting here, I can start a new thread, I really appreciate all your assistance.

It's cool.

So paste the output of the usual troubleshooting, from my original post here:
"Check your logs to see what information you can get, and other places for common errors. "
Back to top
View user's profile Send private message
SuperJudge
Apprentice
Apprentice


Joined: 08 Jun 2004
Posts: 177
Location: Albany, GA

PostPosted: Sun Oct 17, 2004 11:44 am    Post subject: Reply with quote

spyderous wrote:
It's cool.

So paste the output of the usual troubleshooting, from my original post here:
"Check your logs to see what information you can get, and other places for common errors. "
Job's done, thread is here.

What log info should I post, I know startx says it logs to /var/log/Xorg.0.log, should I post that, and what else?
_________________
---Powered by Honda
Back to top
View user's profile Send private message
GoofballJM1
Guru
Guru


Joined: 22 Mar 2004
Posts: 392
Location: Denver, CO USA

PostPosted: Wed Nov 24, 2004 5:58 am    Post subject: Reply with quote

Maybe you all could help me. I have a ATI Rage Pro (Mach64) AGP 2X video card on my old Dell OptiPlex GX1p. I am running 2.6.9-gentoo-r4, Xorg-6.8.0-r3. I have agpgart and my chipset enabled as modules in my kernel, I have them set to run at boot time. I also running the latest x11-drm, where I can find the mach64 driver, which isn't located in the 2.6.9 kernel. Everything loads fine. Here is my relevant information:
Code:
# grep -e '(EE)' -e '(WW)' /var/log/Xorg.0.log
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(WW) ATI(0): config file hsync range 30-69kHz not within DDC hsync ranges.
(WW) ATI(0): config file vrefresh range 50-120Hz not within DDC vrefresh ranges.
(WW) ATI(0): I2C bus Mach64 initialisation failure
(II) ATI(0): I2C bus "Mach64" removed

Now my dmesg:
Code:
# dmesg | grep agp
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 149M
agpgart: AGP aperture is 64M @ 0xf4000000
# dmesg | grep drm
[drm] Initialized mach64 1.0.0 20020904 on minor 0: ATI Technologies Inc 3D Rage Pro AGP 1X/2X
[drm] Used old pci detect: framebuffer loaded

My glxinfo:
Code:
# glxinfo | grep render
direct rendering: No
OpenGL renderer string: Mesa GLX Indirect

It looks like everything is working correctly except when I start X. So the Xorg doesn't load the driver as it should and I don't get direct rendering. glxgears are only running at 131 tops :( Anybody get a mach64 running with a 2.6 kernel and Xorg 6.8?
_________________
"Great spirits have often encountered violent opposition from weak minds." - Albert Einstein
Back to top
View user's profile Send private message
dberkholz
Developer
Developer


Joined: 18 Mar 2003
Posts: 1008
Location: Minneapolis, MN, USA

PostPosted: Wed Nov 24, 2004 7:35 am    Post subject: Reply with quote

SuperJudge wrote:
spyderous wrote:
It's cool.

So paste the output of the usual troubleshooting, from my original post here:
"Check your logs to see what information you can get, and other places for common errors. "
Job's done, thread is here.

What log info should I post, I know startx says it logs to /var/log/Xorg.0.log, should I post that, and what else?

try
Code:
LIBGL_DEBUG=verbose glxinfo

Also be sure you built xorg with USE=insecure-drivers.
Back to top
View user's profile Send private message
GoofballJM1
Guru
Guru


Joined: 22 Mar 2004
Posts: 392
Location: Denver, CO USA

PostPosted: Wed Nov 24, 2004 11:50 pm    Post subject: Reply with quote

Thanks for the link. I did get my DRI working somewhat. Only problem is I still get the same error message from my /var/log/xorg.0.log despite the fact that is says I am getting direct rendering.
Code:
glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: Mesa DRI Mach64 [Rage Pro] 20030502 AGP 2x x86/MMX/SSE

spyderous wrote:

Code:
LIBGL_DEBUG=verbose glxinfo

Here it is:
Code:
$ LIBGL_DEBUG=verbose glxinfo
name of display: :0.0
libGL: XF86DRIGetClientDriverName: 6.5.6 mach64 (screen 0)
libGL: OpenDriver: trying /usr/X11R6/lib/modules/dri/mach64_dri.so
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenByBusid: drmOpenMinor returns 4
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
libGL error:
Can't open configuration file /etc/drirc: No such file or directory.
libGL error:
Can't open configuration file /home/jon-michael/.drirc: No such file or directory.
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
    GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_SGI_video_sync, GLX_SGIS_multisample
OpenGL vendor string: Gareth Hughes, Leif Delgass, José Fonseca
OpenGL renderer string: Mesa DRI Mach64 [Rage Pro] 20030502 AGP 2x x86/MMX/SSE
OpenGL version string: 1.2 Mesa 6.3
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_transpose_matrix,
    GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
    GL_EXT_draw_range_elements, GL_EXT_histogram, GL_EXT_packed_pixels,
    GL_EXT_polygon_offset, GL_EXT_rescale_normal,
    GL_EXT_separate_specular_color, GL_EXT_subtexture, GL_EXT_texture,
    GL_EXT_texture3D, GL_EXT_texture_edge_clamp, GL_EXT_texture_object,
    GL_EXT_vertex_array, GL_APPLE_packed_pixels, GL_IBM_rasterpos_clip,
    GL_MESA_ycbcr_texture, GL_MESA_window_pos, GL_NV_light_max_exponent,
    GL_NV_texgen_reflection, GL_OES_read_format, GL_SGI_color_matrix,
    GL_SGI_color_table, GL_SGIS_generate_mipmap, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 16 tc  0 16  0 r  .  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x24 16 tc  0 16  0 r  .  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x25 16 tc  0 16  0 r  .  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x26 16 tc  0 16  0 r  .  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow
0x27 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x28 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x29 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x2a 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow
0x2b 16 dc  0 16  0 r  .  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x2c 16 dc  0 16  0 r  .  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x2d 16 dc  0 16  0 r  .  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x2e 16 dc  0 16  0 r  .  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow
0x2f 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x30 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x31 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x32 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow

spyderous wrote:
Also be sure you built xorg with USE=insecure-drivers.

I also did that, per the advice from the link you posted. It lead me to another link where it mentioned downloading the drivers straight from the dri website. That worked.

Lastly:
Code:
grep -e '(EE)' -e '(WW)' /var/log/Xorg.0.log
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(WW) ATI(0): I2C bus Mach64 initialisation failure.

The same message. So it says I have DRI enabled, but my FPS on glxgears dropped from 131 to 125, so something still isn't quite right. Any ideas?
_________________
"Great spirits have often encountered violent opposition from weak minds." - Albert Einstein
Back to top
View user's profile Send private message
skunkworx
Guru
Guru


Joined: 02 Feb 2003
Posts: 420
Location: Planet Houston

PostPosted: Sat Nov 27, 2004 10:56 pm    Post subject: Reply with quote

Hello all. I've successfully enabled DRI on my desktop, which has an ATI All-in-Wonder Radeon, and boy has it made a difference! Now I'm trying to get DRI to work on my laptop, but so far haven't been able to. I believe I've tried everything I can think of and have read about, which means I'm probably overlooking something obvious.

The laptop is an IBM ThinkPad T21, which uses a built-in S3 Savage IX-MV for video. For my kernel, I am running gentoo-dev-sources 2.6.9-r4, compiled with this configuration. I am using Xorg 6.8.0-r3, compiled with the "insecure-drivers" USE flag, and running with this configuration. The x11-drm 20040827 package is also installed, compiled with VIDEO_CARDS set to "savage".

I've tried having agpgart compiled into the kernel and as a module. I've tried letting Xorg add the kernel modules itself (it never has), and inserting them manually before restarting the X server. I've even tried naming the DRI section of the xorg.conf file both "DRI" and "dri". The behavior has been the same every time. Nothing obvious ever shows up in the X server logs, but in case it helps, here is the log of my last X startup. The only possible clue I've found is that if I try to load the savage kernel module without agpgart present, it will seg-fault on the first attempt.

Any help will be appreciated, and I'll provide whatever info is needed. Thanks!
_________________
Proud to be a... eh, forget it.

"Everyday is just one day." -- not the Traveling Wilburys
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7209
Location: Pelotas, BR

PostPosted: Sun Nov 28, 2004 2:07 am    Post subject: Reply with quote

I had my Savage working with xorg-x11 6.7.0, however all my atempts to make it work with 6.8.0 were in vain.

I'll just sit and wait for the next release of xorg-x11 to see if it works out of the box.
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
skunkworx
Guru
Guru


Joined: 02 Feb 2003
Posts: 420
Location: Planet Houston

PostPosted: Sun Nov 28, 2004 4:57 pm    Post subject: Reply with quote

pilla wrote:
I had my Savage working with xorg-x11 6.7.0, however all my atempts to make it work with 6.8.0 were in vain.


Aww man, don't say that! :)

Oh well, if it's not just me, then maybe I was setting it up correctly after all. That's good to know.

Thanks for the info!
_________________
Proud to be a... eh, forget it.

"Everyday is just one day." -- not the Traveling Wilburys
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7209
Location: Pelotas, BR

PostPosted: Sun Nov 28, 2004 5:57 pm    Post subject: Reply with quote

skunkworx wrote:
pilla wrote:
I had my Savage working with xorg-x11 6.7.0, however all my atempts to make it work with 6.8.0 were in vain.


Aww man, don't say that! :)

Oh well, if it's not just me, then maybe I was setting it up correctly after all. That's good to know.

Thanks for the info!


If you really want DRM go for xorg-x11 6.7.0 and use the DRI howto (google it), then you should get it working. But it's much of a haslle IMO. The main problem with the current release is that the lastest changes for Savage chipsets haven't been committed in time to go in 6.8.0/1.
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
crimson
Guru
Guru


Joined: 27 Apr 2002
Posts: 430
Location: Cedar Rapids, IA

PostPosted: Sun Jan 09, 2005 5:24 pm    Post subject: Reply with quote

I have a PCI Radeon 7200. I am using kernel 2.6.9, and Xorg 6.8.0. glxinfo tells me I have direct rendering enabled. I just want to know if using the x11-drm drivers would give me a performance increase over the built in kernel driver?
Back to top
View user's profile Send private message
dberkholz
Developer
Developer


Joined: 18 Mar 2003
Posts: 1008
Location: Minneapolis, MN, USA

PostPosted: Sun Aug 07, 2005 9:28 pm    Post subject: Reply with quote

crimson wrote:
I have a PCI Radeon 7200. I am using kernel 2.6.9, and Xorg 6.8.0. glxinfo tells me I have direct rendering enabled. I just want to know if using the x11-drm drivers would give me a performance increase over the built in kernel driver?

In general, no -- this will only happen if someone's changes caused a major performance increase after the last merge from DRM CVS to the kernel but before the last snapshot of x11-drm.
Back to top
View user's profile Send private message
bullring
n00b
n00b


Joined: 24 Jan 2005
Posts: 14
Location: califronia

PostPosted: Sat Mar 04, 2006 5:59 pm    Post subject: problems with dri on a r128 Reply with quote

here is the requested information:

Code:
# grep -e '(EE)' -e '(WW)' /var/log/Xorg.0.log
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) R128(0): Static buffer allocation failed -- need at least 9216 kB video memory


Code:
# glxinfo | grep render
direct rendering: No
OpenGL renderer string: Mesa GLX Indirect


Code:
# dmesg | grep -i agp
[4294690.856000] Linux agpgart interface v0.101 (c) Dave Jones


Code:
# lsmod | grep agp
agpgart                31184  1 drm


Code:
# modprobe agpgart


Code:
# ls -l /dev/dri/card0
crw-rw----  1 root video 226, 0 Feb 22 20:52 /dev/dri/card0


Code:
# ls -ld /dev/dri
drwxr-xr-x  2 root root 4096 Feb 22 20:52 /dev/dri


also here is my xorg conf:

Code:
                                                                   
                                                                     
                                             
Section "ServerLayout"
   Identifier     "Layout0"
   Screen      0  "Screen0" 0 0
   InputDevice    "Keyboard0" "CoreKeyboard"
   InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
   RgbPath      "/usr/lib/X11/rgb"
   FontPath   "/usr/share/fonts/100dpi:unscaled"
   FontPath   "/usr/share/fonts/75dpi:unscaled"
   FontPath   "/usr/share/fonts/TTF"
   FontPath   "/usr/share/fonts/Type1"
   FontPath   "/usr/share/fonts/artwiz"
   FontPath   "/usr/share/fonts/corefonts"
   FontPath   "/usr/share/fonts/cyrillic"
   FontPath   "/usr/share/fonts/dejavu"
   FontPath   "/usr/share/fonts/encodings"
   FontPath   "/usr/share/fonts/freefonts"
   FontPath   "/usr/share/fonts/local"
   FontPath   "/usr/share/fonts/misc"   
   FontPath   "/usr/share/fonts/sharefonts"
   FontPath   "/usr/share/fonts/terminus"
   FontPath   "/usr/share/fonts/ttf-bitstream-vera"
   FontPath   "/usr/share/fonts/ukr"
   FontPath   "/usr/share/fonts/unifont"
   FontPath   "/usr/share/fonts/util"
   
EndSection

Section "Module"
   Load       "freetype"
   Load        "extmod"
   Load        "glx"
   Load        "dri"
   Load        "dbe"
   Load        "record"
   Load        "xtrap"
   Load        "type1"
   Load      "GLcore"
   Load      "record"
EndSection

Section "InputDevice"
   Identifier     "Keyboard0"
   Driver         "keyboard"
   Option          "XkbModel" "pc102"
   Option          "XkbLayout" "us"
EndSection

Section "InputDevice"
   Identifier     "Mouse0"
   Driver         "mouse"
   Option      "CorePointer"
   Option          "Device"    "/dev/psaux"
    Option          "Protocol"    "PS/2"
   Option      "Emulate3Buttons" "True"
   Option      "ZAxisMapping"   "4 5"
EndSection

Section "Monitor"
   Identifier      "Monitor0"
   VendorName      "Samsung"
   ModelName       "LT141x8-L02"
   HorizSync       31.5 - 48.5
   VertRefresh     50.0 - 70.0
   # Modeline   "1400x1050" 113.89 1400 1432 1552 1752 1050 1053 1056 1084 -hsync -vsync
   # Option   "DPMS" "true"
EndSection

Section "Device"
   Identifier          "Card0"
   Driver              "r128"
   VendorName     "ATI Technologies Inc"
   BoardName      "Rage Mobility M3 AGP 2x"
   # VideoRam   8192
   Option               "DMAForXv"    "True"
   Option               "AGPMode"    "2"
   # Option       "AGPFastWrite"   "True"
   Option           "EnablePageFlip" "True"
   BusID               "PCI:1:0:0"
EndSection

Section "Screen"
   Identifier    "Screen0"
   Device        "Card0"
   Monitor       "Monitor0"
   DefaultDepth     16
   DefaultFbBpp    32
   SubSection    "Display"
      Viewport   0 0
      Depth     32
      Modes    "1024x768"
   EndSubSection
EndSection

Section "DRI"
   Mode 0666
EndSection

Section "extensions"
   Option      "Composite"    "Enable"
EndSection


and the output of Xorg.0.log:

Code:
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.15-gentoo-r5 i686 [ELF]
Current Operating System: Linux Mobil-HELL 2.6.15-gentoo-r5 #8 SMP PREEMPT Sun Feb 26 20:16:24 UTC 2006 i686
Build Date: 25 February 2006
   Before reporting problems, check http://wiki.X.Org
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar  4 09:31:15 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbModel" "pc102"
(**) XKB: model: "pc102"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse0"
(**) FontPath set to "/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled
,/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/artwiz,
/usr/share/fonts/corefonts,
/usr/share/fonts/cyrillic,
/usr/share/fonts/dejavu,
/usr/share/fonts/encodings,
/usr/share/fonts/freefonts,
/usr/share/fonts/local,
/usr/share/fonts/misc,
/usr/share/fonts/sharefonts,
/usr/share/fonts/terminus,
/usr/share/fonts/ttf-bitstream-vera,
/usr/share/fonts/ukr,
/usr/share/fonts/unifont,/usr/share/fonts/util"
(**) RgbPath set to "/usr/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(**) Extension "Composite" is enabled
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.2
   X.Org Video Driver: 0.7
   X.Org XInput driver : 0.4
   X.Org Server Extension : 0.2
   X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 104c,ac51 card 1000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 00:03:1: chip 104c,ac51 card 1800,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 03 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 125d,1998 card 1028,00b1 rev 10 class 04,01,00 hdr 00
(II) PCI: 00:10:0: chip 10b7,6055 card 10b7,6456 rev 10 class 02,00,00 hdr 80
(II) PCI: 00:10:1: chip 10b7,1007 card 10b7,615b rev 10 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c46 card 1028,00b1 rev 02 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   [0] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
(II) Bus 1 I/O range:
   [0] -1   0   0x0000e000 - 0x0000e0ff (0x100) IX[B]
   [1] -1   0   0x0000e400 - 0x0000e4ff (0x100) IX[B]
   [2] -1   0   0x0000e800 - 0x0000e8ff (0x100) IX[B]
   [3] -1   0   0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
   [0] -1   0   0xfd000000 - 0xfeffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
   [0] -1   0   0xf8000000 - 0xfbffffff (0x4000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:3:0), (0,2,5), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 2 I/O range:
   [0] -1   0   0x00001000 - 0x000010ff (0x100) IX[B]
   [1] -1   0   0x00001400 - 0x000014ff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
   [0] -1   0   0x32000000 - 0x33ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
   [0] -1   0   0x30000000 - 0x31ffffff (0x2000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (0:3:1), (0,6,9), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 6 I/O range:
   [0] -1   0   0x00001800 - 0x000018ff (0x100) IX[B]
   [1] -1   0   0x00001c00 - 0x00001cff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
   [0] -1   0   0x36000000 - 0x37ffffff (0x2000000) MX[B]
(II) Bus 6 prefetchable memory range:
   [0] -1   0   0x34000000 - 0x35ffffff (0x2000000) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc Rage Mobility M3 AGP 2x rev 2, Mem @ 0xf8000000/26, 0xfdffc000/14, I/O @ 0xec00/8
(II) Addressable bus resource ranges are
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
   [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf4000000 from 0xf7ffffff to 0xf3ffffff
(II) Active PCI resource ranges:
   [0] -1   0   0xf3ffd000 - 0xf3ffd07f (0x80) MX[B]
   [1] -1   0   0xf3ffd400 - 0xf3ffd4ff (0x100) MX[B]
   [2] -1   0   0xf3ffd800 - 0xf3ffd87f (0x80) MX[B]
   [3] -1   0   0xf3ffdc00 - 0xf3ffdc7f (0x80) MX[B]
   [4] -1   0   0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]
   [5] -1   0   0xf4000000 - 0xf3ffffff (0x0) MX[B]O
   [6] -1   0   0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
   [7] -1   0   0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
   [8] -1   0   0x0000d000 - 0x0000d0ff (0x100) IX[B]
   [9] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [10] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B]
   [11] -1   0   0x0000dce0 - 0x0000dcff (0x20) IX[B]
   [12] -1   0   0x00000860 - 0x0000086f (0x10) IX[B]
   [13] -1   0   0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
   [0] -1   0   0xf3ffd000 - 0xf3ffd07f (0x80) MX[B]
   [1] -1   0   0xf3ffd400 - 0xf3ffd4ff (0x100) MX[B]
   [2] -1   0   0xf3ffd800 - 0xf3ffd87f (0x80) MX[B]
   [3] -1   0   0xf3ffdc00 - 0xf3ffdc7f (0x80) MX[B]
   [4] -1   0   0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]
   [5] -1   0   0xf4000000 - 0xf3ffffff (0x0) MX[B]O
   [6] -1   0   0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
   [7] -1   0   0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
   [8] -1   0   0x0000d000 - 0x0000d0ff (0x100) IX[B]
   [9] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [10] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B]
   [11] -1   0   0x0000dce0 - 0x0000dcff (0x20) IX[B]
   [12] -1   0   0x00000860 - 0x0000086f (0x10) IX[B]
   [13] -1   0   0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xf3ffd000 - 0xf3ffd07f (0x80) MX[B]
   [6] -1   0   0xf3ffd400 - 0xf3ffd4ff (0x100) MX[B]
   [7] -1   0   0xf3ffd800 - 0xf3ffd87f (0x80) MX[B]
   [8] -1   0   0xf3ffdc00 - 0xf3ffdc7f (0x80) MX[B]
   [9] -1   0   0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]
   [10] -1   0   0xf4000000 - 0xf3ffffff (0x0) MX[B]O
   [11] -1   0   0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
   [12] -1   0   0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
   [13] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [14] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [15] -1   0   0x0000d000 - 0x0000d0ff (0x100) IX[B]
   [16] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [17] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B]
   [18] -1   0   0x0000dce0 - 0x0000dcff (0x20) IX[B]
   [19] -1   0   0x00000860 - 0x0000086f (0x10) IX[B]
   [20] -1   0   0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
   compiled for 6.8.2, module version = 2.1.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.2
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "GLcore"
(II) Reloading /usr/lib/modules/extensions/libGLcore.a
(II) LoadModule: "record"
(II) Reloading /usr/lib/modules/extensions/librecord.a
(II) Loading extension RECORD
(II) LoadModule: "r128"
(II) Loading /usr/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 4.0.1
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "ati"
(II) Loading /usr/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 6.5.6
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/modules/input/keyboard_drv.o
(II) Module keyboard: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
   ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
   ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
   ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
   ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
   ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
   ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
   ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
   ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
   ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
   ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
   ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
   ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
   ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
   ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
   ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
   ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
   ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
   ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
   ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
   ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
   ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
   ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
   ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
   ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
   ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
   ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
   ATI Radeon Mobility M7 LW (AGP),
   ATI Mobility FireGL 7800 M7 LX (AGP),
   ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
   ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
   ATI Radeon IGP330/340/350 (A4) 4137,
   ATI Radeon IGP330M/340M/350M (U2) 4337,
   ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
   ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
   ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
   ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
   ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
   ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
   ATI Radeon Mobility 9000 (M9) Lf (AGP),
   ATI Radeon Mobility 9000 (M9) Lg (AGP),
   ATI Radeon 9100 IGP (A5) 5834,
   ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
   ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
   ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
   ATI Radeon 9200SE 5964 (AGP),
   ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
   ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
   ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
   ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
   ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
   ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
   ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
   ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
   ATI FireGL RV360 AV (AGP),
   ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
   ATI Radeon Mobility 9600 (M10) NQ (AGP),
   ATI Radeon Mobility 9600 (M11) NR (AGP),
   ATI Radeon Mobility 9600 (M10) NS (AGP),
   ATI FireGL Mobility T2 (M10) NT (AGP),
   ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
   ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
   ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
   ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
   ATI Radeon 9800XT NJ (AGP), ATI Radeon X600 (RV380) 3E50 (PCIE),
   ATI FireGL V3200 (RV380) 3E54 (PCIE),
   ATI Radeon Mobility X600 (M24) 3150 (PCIE),
   ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
   ATI Radeon X600 (RV370) 5B62 (PCIE),
   ATI FireGL V3100 (RV370) 5B64 (PCIE),
   ATI FireGL D1100 (RV370) 5B65 (PCIE),
   ATI Radeon Mobility M300 (M22) 5460 (PCIE),
   ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R420) JH (AGP),
   ATI Radeon X800PRO (R420) JI (AGP),
   ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
   ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
   ATI Radeon Mobility 9800 (M18) JN (AGP),
   ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 (R423) UH (PCIE),
   ATI Radeon X800PRO (R423) UI (PCIE),
   ATI Radeon X800LE (R423) UJ (PCIE),
   ATI Radeon X800SE (R423) UK (PCIE),
   ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
   ATI FireGL V7100 (R423) UT (PCIE),
   ATI Radeon X800XT (R423) 5D57 (PCIE)
(II) Primary Device is: PCI 01:00:0
(--) Chipset ATI Rage 128 Mobility M3 LF (AGP) found
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Reloading /usr/lib/modules/drivers/r128_drv.o
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xf3ffd000 - 0xf3ffd07f (0x80) MX[B]
   [6] -1   0   0xf3ffd400 - 0xf3ffd4ff (0x100) MX[B]
   [7] -1   0   0xf3ffd800 - 0xf3ffd87f (0x80) MX[B]
   [8] -1   0   0xf3ffdc00 - 0xf3ffdc7f (0x80) MX[B]
   [9] -1   0   0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]
   [10] -1   0   0xf4000000 - 0xf3ffffff (0x0) MX[B]O
   [11] -1   0   0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
   [12] -1   0   0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
   [13] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [14] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [15] -1   0   0x0000d000 - 0x0000d0ff (0x100) IX[B]
   [16] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [17] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B]
   [18] -1   0   0x0000dce0 - 0x0000dcff (0x20) IX[B]
   [19] -1   0   0x00000860 - 0x0000086f (0x10) IX[B]
   [20] -1   0   0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
(II) resource ranges after probing:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xf3ffd000 - 0xf3ffd07f (0x80) MX[B]
   [6] -1   0   0xf3ffd400 - 0xf3ffd4ff (0x100) MX[B]
   [7] -1   0   0xf3ffd800 - 0xf3ffd87f (0x80) MX[B]
   [8] -1   0   0xf3ffdc00 - 0xf3ffdc7f (0x80) MX[B]
   [9] -1   0   0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]
   [10] -1   0   0xf4000000 - 0xf3ffffff (0x0) MX[B]O
   [11] -1   0   0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
   [12] -1   0   0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
   [13] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [14] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [15] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [16] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [17] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [18] -1   0   0x0000d000 - 0x0000d0ff (0x100) IX[B]
   [19] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [20] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B]
   [21] -1   0   0x0000dce0 - 0x0000dcff (0x20) IX[B]
   [22] -1   0   0x00000860 - 0x0000086f (0x10) IX[B]
   [23] -1   0   0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
   [24] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [25] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 1 card 0 func 0
(II) R128(0): Creating default Display subsection in Screen section
   "Screen0" for depth/fbbpp 16/32
(**) R128(0): Depth 16, (**) framebuffer bpp 32
(II) R128(0): Pixel depth = 16 bits stored in 4 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "DMAForXv" "True"
(**) R128(0): Option "AGPMode" "2"
(**) R128(0): Option "EnablePageFlip" "True"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 0.1.0
   ABI class: X.Org Video Driver, version 0.7
(II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Mobility M3 LF (AGP)" (ChipID = 0x4c46)
(--) R128(0): Linear framebuffer at 0xf8000000
(--) R128(0): MMIO registers at 0xfdffc000
(--) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using flat panel for display
(**) R128(0): Will try to use DMA for Xv image transfers
(II) R128(0): Panel size: 1024x768
(II) R128(0): Panel ID: Samsung LT141X8-L02     
(II) R128(0): Panel Type: Color, Single, TFT
(II) R128(0): Panel Interface: LVDS
(II) R128(0): PLL parameters: rf=2700 rd=12 min=12000 max=27000; xclk=10500
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.1.0
   ABI class: X.Org Video Driver, version 0.7
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 8192 kB
(II) R128(0): VESA VBE OEM: ATI MOBILE M3
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: M3 
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/modules/libddc.a
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level none
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read failed
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): Monitor0: Using hsync range of 31.50-48.50 kHz
(II) R128(0): Monitor0: Using vrefresh range of 50.00-70.00 Hz
(II) R128(0): Clock range:  12.00 to 270.00 MHz
(II) R128(0): Not using default mode "640x350" (vrefresh out of range)
(II) R128(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x400" (vrefresh out of range)
(II) R128(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "720x400" (no mode of this name)
(II) R128(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "640x480" (vrefresh out of range)
(II) R128(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (vrefresh out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (vrefresh out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x864" (no mode of this name)
(II) R128(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x960" (no mode of this name)
(II) R128(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x960" (no mode of this name)
(II) R128(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (no mode of this name)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (no mode of this name)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1280x1024" (no mode of this name)
(II) R128(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1200" (no mode of this name)
(II) R128(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "832x624" (no mode of this name)
(II) R128(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1152x768" (no mode of this name)
(II) R128(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (no mode of this name)
(II) R128(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1400x1050" (no mode of this name)
(II) R128(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1600x1024" (no mode of this name)
(II) R128(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) R128(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) R128(0): Modifying mode according to VBIOS: 1024x768 [pclk 65.0 MHz] for FP to: 1024x768 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 800x600 [pclk 40.0 MHz] for FP to: 800x600 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 800x600 [pclk 36.0 MHz] for FP to: 800x600 [pclk 65.0 MHz]
(II) R128(0): Modifying mode according to VBIOS: 640x480 [pclk 25.2 MHz] for FP to: 640x480 [pclk 65.0 MHz]
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) R128(0): Modeline "1024x768"   65.00  1024 1048 1065 1344  768 770 776 806 -hsync -vsync
(**) R128(0): *Default mode "800x600": 65.0 MHz (scaled from 40.0 MHz), 37.9 kHz, 60.3 Hz
(II) R128(0): Modeline "800x600"   65.00  800 824 841 1120  600 602 608 638 +hsync +vsync
(**) R128(0): *Default mode "800x600": 65.0 MHz (scaled from 36.0 MHz), 35.2 kHz, 56.2 Hz
(II) R128(0): Modeline "800x600"   65.00  800 824 841 1120  600 602 608 638 +hsync +vsync
(**) R128(0): *Default mode "640x480": 65.0 MHz (scaled from 25.2 MHz), 31.5 kHz, 60.0 Hz
(II) R128(0): Modeline "640x480"   65.00  640 664 681 960  480 482 488 518 -hsync -vsync
(==) R128(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 0.1.0
   ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.2.0
   ABI class: X.Org Video Driver, version 0.7
(**) R128(0): Using AGP 2x mode
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.2
(II) R128(0): Page flipping enabled
(!!) R128(0): For information on using the multimedia capabilities
   of this adapter, please see http://gatos.sf.net.
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] 0   0   0xfdffc000 - 0xfdffffff (0x4000) MS[B]
   [1] 0   0   0xf8000000 - 0xfbffffff (0x4000000) MS[B]
   [2] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [3] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [4] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [5] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [6] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [7] -1   0   0xf3ffd000 - 0xf3ffd07f (0x80) MX[B]
   [8] -1   0   0xf3ffd400 - 0xf3ffd4ff (0x100) MX[B]
   [9] -1   0   0xf3ffd800 - 0xf3ffd87f (0x80) MX[B]
   [10] -1   0   0xf3ffdc00 - 0xf3ffdc7f (0x80) MX[B]
   [11] -1   0   0xf3ffe000 - 0xf3ffffff (0x2000) MX[B]
   [12] -1   0   0xf4000000 - 0xf3ffffff (0x0) MX[B]O
   [13] -1   0   0xfdffc000 - 0xfdffffff (0x4000) MX[B](B)
   [14] -1   0   0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
   [15] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
   [16] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
   [17] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
   [18] 0   0   0x0000ec00 - 0x0000ecff (0x100) IS[B]
   [19] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [20] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [21] -1   0   0x0000d000 - 0x0000d0ff (0x100) IX[B]
   [22] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [23] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B]
   [24] -1   0   0x0000dce0 - 0x0000dcff (0x20) IX[B]
   [25] -1   0   0x00000860 - 0x0000086f (0x10) IX[B]
   [26] -1   0   0x0000ec00 - 0x0000ecff (0x100) IX[B](B)
   [27] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
   [28] 0   0   0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) R128(0): Write-combining range (0xf8000000,0x800000)
(WW) R128(0): Static buffer allocation failed -- need at least 9216 kB video memory
(II) R128(0): Memory manager initialized to (0,0) (1024,2048)
(II) R128(0): Reserved area from (0,768) to (1024,770)
(II) R128(0): Largest offscreen area available: 1024 x 1278
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
   Solid filled rectangles
   8x8 mono pattern filled rectangles
   Indirect CPU to Screen color expansion
   Solid Lines
   Dashed Lines
   Scanline Image Writes
   Offscreen Pixmaps
   Setting up tile and stipple cache:
      32 128x128 slots
      10 256x256 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 3080)
(II) R128(0): Largest offscreen area available: 1024 x 1276
(II) R128(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Keyboard0: XkbModel: "pc102"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "PS/2"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "True"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(**) Mouse0: SmartScroll: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) Mouse0: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/encodings, removing from list!
Could not init font path element /usr/share/fonts/local, removing from list!
Could not init font path element /usr/share/fonts/util, removing from list!




output of glxinfo:

Code:
# LIBGL_DEBUG=verbose glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
    GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
    GLX_SGIX_visual_select_group
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
    GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
    GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
    GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
    GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
    GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
    GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
    GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
    GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
    GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
    GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
    GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
    GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
    GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
    GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x24 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 None
0x25 16 tc  0 24  0 r  y  .  5  6  5  8  0 16  8 16 16 16 16  0 0 None
0x26 16 tc  0 24  0 r  .  .  5  6  5  8  0 16  8 16 16 16 16  0 0 None
0x27 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x28 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 None
0x29 16 dc  0 24  0 r  y  .  5  6  5  8  0 16  8 16 16 16 16  0 0 None
0x2a 16 dc  0 24  0 r  .  .  5  6  5  8  0 16  8 16 16 16 16  0 0 None
0x3f 32 tc  1  0  0 c  .  .  0  0  0  0  0  0  0  0  0  0  0  0 0 None


Any help you guys could give would be great.

I would like to have X11 all smooth before i emerge a DM.
let me know if you need anymore info or if i should edit any of this info out.
sorry for the long post...
thank you.


Last edited by bullring on Sat Mar 04, 2006 7:49 pm; edited 1 time in total
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks All times are GMT
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next
Page 6 of 8

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum