binfu
n00b
Joined: 05 Sep 2002
Posts: 7
Location: Houston, TX (Spring)
|
 Posted: Mon Dec 23, 2002 3:56 am Post subject: Cd recording problems |
 |
|
cd recording problems with my ide burner.
current modules loaded:
| Code: |
bash-2.05a# lsmod
Module Size Used by Not tainted
ide-scsi 8048 1
sg 27500 1
scsi_mod 85652 2 [ide-scsi sg]
loop 9368 0 (unused)
tulip 40672 1
sb 7476 1
sb_lib 36206 0 [sb]
uart401 6756 0 [sb_lib]
sound 58380 1 [sb_lib uart401]
bash-2.05a#
|
and the output from cdrecord -scanbus
| Code: |
bash-2.05a# cdrecord -scanbus
Cdrecord 1.11a33 (i586-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
scsibus0:
cdrecord: Warning: controller returns wrong size for CD capabilities page.
0,0,0 0) 'E-IDE ' 'CD-ROM 50X ' '41 ' Removable CD-ROM
|
it just hangs here, but the lights for my CD reader and CD writer do blink, so it knows they are there. (or does it ???)
now, when i run a dmesg, it goes AWOL...
| Code: |
SCSI host 0 abort (pid 60) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 60, scsi0, channel 0, id 1, lun 0 Request Sense 00 00 00 40 00
SCSI host 0 abort (pid 60) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
hdc: lost interrupt
|
thats the last output of dmesg, and it repeats that a bunch. also, when i boot the machine and it detects the cdroms, it seems to output the "hdc: lost interrupt" about 5 times. hdc is my cd recorder, hdb is my cd recorder, and hda is my harddrive.
and when i do modprobe the ide-scsi module, it takes about 10 - 20 seconds for it to go from:
bash-2.05# modprobe ide-scsi
to
bash-2.05#
i dont know if thats normal or not. maybe i am just to paranoid.
any ideas? |
|
Kernel & Hardware
