| View previous topic :: View next topic |
| Author |
Message |
gspr
Tux's lil' helper
Joined: 07 Sep 2002
Posts: 127
|
 Posted: Wed Sep 15, 2004 5:04 pm Post subject: [SOLVED] Speedstepping on a Dothan 1.7 GHz |
 |
|
Hi.
Things seem to work quite smoothly now on my Toshiba Tecra A2 (1.7 GHz Dothan CPU, Centrino)... except for suspend-to-RAM and speedstepping.
Let's take suspend-to-RAM first: I really don't HAVE TO have it, but it would be really nice. I've enabled sleep states under ACPI in the kernel, and using either the /proc or the /sys interface, I am able to send the computer to sleep. To make it wake up again, I close and open the lid or hit the power button (as it reported under boot that these should trigger wakeup). I hear the disks spinning up, and the screen comes alive. Then it gives me a text warning with something like "WARNING: WAKEUP FAILED. PRESS ANY KEY TO REBOOT". I do, and I'm back at the BIOS booting. Any ideas? I have enabled the Toshiba stuff in the kernel.
As for speedstepping... this is something that I sort of "need". Kernel 2.6.9-rc1-mmN are supposed to have Dothan speedstepping support, so I'm using 2.6.9-rc1-mm5. I enable speedstepping in the kernel, like so:
| Code: | #
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_PROC_INTF is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_CPU_FREQ_TABLE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
|
During boot, I get a very odd message:
| Code: | speedstep-centrino: no table support for CPU model "Intel(R) Pentium(R) M processor 1.70GHz":
speedstep-centrino: try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled
|
... which is of course enabled... Am I right in going "huh?" here?
Thanks for any tips!
_________________
"People said I should accept the world. Bullshit! I don't accept the world." -- RMS.
"We are to admit no more causes of natural things than such as are both true and sufficient to explain their appearances." -- Newton.
Last edited by gspr on Tue Sep 21, 2004 3:05 pm; edited 2 times in total |
|
| Back to top |
|
 |
brodo
Guru
Joined: 15 Apr 2003
Posts: 319
|
| Posted: Wed Sep 15, 2004 9:46 pm Post subject: Re: Suspend to RAM and speedstepping (Toshiba Tecra A2) |
|
|
| gspr wrote: | | Code: | CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
|
During boot, I get a very odd message:
| Code: | speedstep-centrino: no table support for CPU model "Intel(R) Pentium(R) M processor 1.70GHz":
speedstep-centrino: try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled
|
... which is of course enabled... Am I right in going "huh?" here?
Thanks for any tips! |
Nope, that comment is enabled unconditionally if _TABLE (which is tried after _ACPI) fails. Looks like there is data in the ACPI tables missing. What does "modprobe acpi" result in? |
|
| Back to top |
|
|
gspr
Tux's lil' helper
Joined: 07 Sep 2002
Posts: 127
|
| Posted: Thu Sep 16, 2004 12:09 pm Post subject: |
|
|
ACPI is compiled into the kernel (not as a module). Any ideas?
Here's my dmesg:
| Code: | Linux version 2.6.9-rc1-mm5 (root@pax) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #2 Wed Sep 15 18:11:20 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ef40000 (usable)
BIOS-e820: 000000001ef40000 - 000000001ef50000 (ACPI data)
BIOS-e820: 000000001ef50000 - 000000001f000000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
495MB LOWMEM available.
On node 0 totalpages: 126784
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 122688 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 TOSHIB ) @ 0x000f0180
ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef40000
ACPI: FADT (v002 TOSHIB 750 0x20030101 TASM 0x04010000) @ 0x1ef40060
ACPI: SSDT (v001 TOSHIB LNK10SS 0x20040226 MSFT 0x0100000e) @ 0x1ef445d1
ACPI: DBGP (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef400e4
ACPI: BOOT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef40038
ACPI: SSDT (v001 TOSHIB A0016 0x20040226 MSFT 0x0100000e) @ 0x1ef4673a
ACPI: DSDT (v001 TOSHIB A0016 0x20040426 MSFT 0x0100000e) @ 0x00000000
Built 1 zonelists
Initializing CPU#0
Kernel command line: root=/dev/hda3
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1696.004 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 499340k/507136k available (1873k kernel code, 7312k reserved, 739k data, 136k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3358.72 BogoMIPS (lpj=1679360)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000
CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Level Trigger.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd480, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: Power Resource [PFAN] (off)
Toshiba System Managment Mode driver v1.11 26/9/2001
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
Simple Boot Flag at 0x7c set to 0x1
Initializing Cryptographic API
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Fan [FAN] (off)
ACPI: Processor [CPU0] (supports C1 C2 C3)
ACPI: Thermal Zone [THRM] (32 C)
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Maximum main memory to use for agp memory: 424M
agpgart: Detected 16252K stolen memory.
agpgart: AGP aperture is 128M @ 0xd8000000
i8042: ACPI [KBC] at I/O 0x60, 0x64, irq 1
i8042: ACPI [PS2M] at irq 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK6025GAS, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-R2512, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
perfctr: driver 2.7.5, cpu type Intel P6 at 1696004 kHz
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
P6 has larger frequency than P0, skipping
P7 has larger frequency than P0, skipping
P8 has larger frequency than P0, skipping
P9 has larger frequency than P0, skipping
P10 has larger frequency than P0, skipping
P11 has larger frequency than P0, skipping
P12 has larger frequency than P0, skipping
P13 has larger frequency than P0, skipping
P14 has larger frequency than P0, skipping
P15 has larger frequency than P0, skipping
Invalid encoded frequency
speedstep-centrino: no table support for CPU model "Intel(R) Pentium(R) M processor 1.70GHz":
speedstep-centrino: try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
VIY0 LAN COM USB1 USB3 USB4 AMDM USB2 LID PWRB
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 136k freed
Adding 996020k swap on /dev/hda2. Priority:-1 extents:1
e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0xcfffe000, irq 11, MAC addr 00:0E:7B:A2:28:12
ieee80211_crypt: registered algorithm 'NULL'
ipw2200: Intel(R) PRO/Wireless 2200 Network Driver, 0.7
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 11 (level, low) -> IRQ 11
eth1: Setting MAC to 00:0e:35:47:09:c0
ipw2200: Calibration
usbcore: registered new driver usbfs
usbcore: registered new driver hub
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Real Time Clock Driver v1.12
PCI: Enabling device 0000:00:1f.5 (0000 -> 0003)
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
intel8x0_measure_ac97_clock: measured 49522 usecs
intel8x0: clocking to 48000
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 10, io base 0xcfe0
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 0xcf80
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 0xcf60
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem 0x1f080000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[drm] Initialized i915 1.1.0 20040405 on minor 0: Intel Corp. 82852/855GM Integrated Graphics Device
[drm] Initialized i915 1.1.0 20040405 on minor 1: Intel Corp. 82852/855GM Integrated Graphics Device (#2)
mtrr: base(0xd8020000) is not aligned on a size(0x59c000) boundary
mtrr: base(0xd8020000) is not aligned on a size(0x59c000) boundary
mtrr: base(0xd8020000) is not aligned on a size(0x59c000) boundary
mtrr: base(0xd8020000) is not aligned on a size(0x59c000) boundary
mtrr: base(0xd8020000) is not aligned on a size(0x59c000) boundary
|
_________________
"People said I should accept the world. Bullshit! I don't accept the world." -- RMS.
"We are to admit no more causes of natural things than such as are both true and sufficient to explain their appearances." -- Newton. |
|
| Back to top |
|
|
brodo
Guru
Joined: 15 Apr 2003
Posts: 319
|
| Posted: Fri Sep 17, 2004 7:21 pm Post subject: |
|
|
| yes. please enable CONFIG_X86_ACPI_CPUFREQ (maybe without _X86_, I forgot) in the kernel configs, disable (temporarily) CONFIG_X86_SPEEDSTEP_CENTRINO, re-compile, re-install, re-boot and post the dmesg here. |
|
| Back to top |
|
|
gspr
Tux's lil' helper
Joined: 07 Sep 2002
Posts: 127
|
| Posted: Sat Sep 18, 2004 4:06 pm Post subject: |
|
|
CONFIG_X86_ACPI_CPUFREQ is now on, and SPEEDSTEP_CENTRINO is now off:
| Code: | Linux version 2.6.9-rc2-mm1 (root@pax) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #2 Sat Sep 18 17:49:27 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ef40000 (usable)
BIOS-e820: 000000001ef40000 - 000000001ef50000 (ACPI data)
BIOS-e820: 000000001ef50000 - 000000001f000000 (reserved)
BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
495MB LOWMEM available.
On node 0 totalpages: 126784
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 122688 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 TOSHIB ) @ 0x000f0180
ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef40000
ACPI: FADT (v002 TOSHIB 750 0x20030101 TASM 0x04010000) @ 0x1ef40060
ACPI: SSDT (v001 TOSHIB LNK10SS 0x20040226 MSFT 0x0100000e) @ 0x1ef445d1
ACPI: DBGP (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef400e4
ACPI: BOOT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x1ef40038
ACPI: SSDT (v001 TOSHIB A0016 0x20040226 MSFT 0x0100000e) @ 0x1ef4673a
ACPI: DSDT (v001 TOSHIB A0016 0x20040426 MSFT 0x0100000e) @ 0x00000000
Built 1 zonelists
Initializing CPU#0
Kernel command line: root=/dev/hda3
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1696.014 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 499332k/507136k available (1876k kernel code, 7320k reserved, 739k data, 136k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3358.72 BogoMIPS (lpj=1679360)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000
CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Level Trigger.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd480, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: Power Resource [PFAN] (off)
Toshiba System Managment Mode driver v1.11 26/9/2001
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
Simple Boot Flag at 0x7c set to 0x1
Initializing Cryptographic API
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Fan [FAN] (off)
ACPI: Processor [CPU0] (supports C1 C2 C3)
ACPI: Thermal Zone [THRM] (60 C)
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Maximum main memory to use for agp memory: 424M
agpgart: Detected 16252K stolen memory.
agpgart: AGP aperture is 128M @ 0xd8000000
i8042: ACPI [KBC] at I/O 0x60, 0x64, irq 1
i8042: ACPI [PS2M] at irq 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK6025GAS, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-R2512, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
perfctr: driver 2.7.5, cpu type Intel P6 at 1696014 kHz
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
VIY0 LAN COM USB1 USB3 USB4 AMDM USB2 LID PWRB
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 136k freed
Adding 996020k swap on /dev/hda2. Priority:-1 extents:1
e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0xcfffe000, irq 11, MAC addr 00:0E:7B:A2:28:12
ieee80211_crypt: registered algorithm 'NULL'
ipw2200: Intel(R) PRO/Wireless 2200 Network Driver, 0.7
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 11 (level, low) -> IRQ 11
eth1: Setting MAC to 00:0e:35:47:09:c0
ipw2200: Calibration
usbcore: registered new driver usbfs
usbcore: registered new driver hub
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Real Time Clock Driver v1.12
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
PCI: Enabling device 0000:00:1f.5 (0000 -> 0003)
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49522 usecs
intel8x0: clocking to 48000
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 10, io base 0xcfe0
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 0xcf80
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 0xcf60
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem 0x1f080000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[drm] Initialized i915 1.1.0 20040405 on minor 0: Intel Corp. 82852/855GM Integrated Graphics Device
[drm] Initialized i915 1.1.0 20040405 on minor 1: Intel Corp. 82852/855GM Integrated Graphics Device (#2)
mtrr: base(0xd8020000) is not aligned on a size(0x59c000) boundary
|
_________________
"People said I should accept the world. Bullshit! I don't accept the world." -- RMS.
"We are to admit no more causes of natural things than such as are both true and sufficient to explain their appearances." -- Newton. |
|
| Back to top |
|
|
brodo
Guru
Joined: 15 Apr 2003
Posts: 319
|
| Posted: Sat Sep 18, 2004 10:14 pm Post subject: |
|
|
| Unfortunately, the pure ACPI driver doesn't seem to work on your notebook. So let's get speedstep-centrino to work. I think it may be related to the issue also seen at http://forums.gentoo.org/viewtopic.php?t=222919: the encoded frequencies in the ACPI specification do not match the actual frequencies. As the speedstep-centrino driver is smarter than the driver used in the other thread, it aborts (see message "invalid encoded frequency"). Please dissasemble both SSDTs and the DSDT and search for the _PSS object and post its content (only _PSS; nothing more) here. For more information on how to do that, please look at http://acpi.sf.net, or search the web for "acpixtract" ... you should find something then, if not, report it here and I'll write something up. |
|
| Back to top |
|
|
gspr
Tux's lil' helper
Joined: 07 Sep 2002
Posts: 127
|
| Posted: Mon Sep 20, 2004 8:29 am Post subject: |
|
|
Thanks a lot for your help. I will get to it as soon as there is time (read: later today, most likely).
_________________
"People said I should accept the world. Bullshit! I don't accept the world." -- RMS.
"We are to admit no more causes of natural things than such as are both true and sufficient to explain their appearances." -- Newton. |
|
| Back to top |
|
|
gspr
Tux's lil' helper
Joined: 07 Sep 2002
Posts: 127
|
| Posted: Mon Sep 20, 2004 12:53 pm Post subject: |
|
|
Is this right?
DSDT:
| Code: | ---snip---
GCVS, 8,
Offset (0x486),
DDS0, 8,
Offset (0x4C0),
PSS0, 16,
PSS1, 16,
Offset (0x4D0),
SYU0, 1,
SYU1, 1,
---snip--- |
SSDT:
| Code: | ---snip---
Method (_PSS, 0, NotSerialized)
{
Return (TPSS)
}
---snip--- |
I'm quite sure this is not what you asked for, especially since I've only got one SSDT (I didn't know the name of the other).
Correct me if I'm wrong, but this is what I did:
1) Used acpidmp from pmtools to create a dump file acpidmp.out.
2) Used acpixtract as follows:
cat acpidmp.out | acpidmp/acpixtract DSDT > DSDT
cat acpidmp.out | acpidmp/acpixtract SSDT > SSDT
3) Disassembled as follows:
iasl -d DSDT
iasl -d SSDT
4) Posted occurences of "PSS" as found in the DSDT.dsl and SSDT.dsl files.
Complete files can be found here: http://gspr.dyndns.org/~gspr/tmp/acpi/
I very much appreciate your help and patience with this 
_________________
"People said I should accept the world. Bullshit! I don't accept the world." -- RMS.
"We are to admit no more causes of natural things than such as are both true and sufficient to explain their appearances." -- Newton. |
|
| Back to top |
|
|
brodo
Guru
Joined: 15 Apr 2003
Posts: 319
|
| Posted: Mon Sep 20, 2004 5:36 pm Post subject: |
|
|
| gspr wrote: | Is this right?
SSDT:
| Code: | ---snip---
Method (_PSS, 0, NotSerialized)
{
Return (TPSS)
}
---snip--- |
|
Yes, now I just had to look at the TPSS. And I fond a small bug in speedstep-centrino which causes it to fail on your system. As I don't know whether posting patches works here: if you can't use it this way, please send me an e-mail to linux AT brodo DOT de
| Code: |
--- linux-2.6.9-rc2+/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c.orig 2004-09-20 19:30:09.196155072 +0200
+++ linux-2.6.9-rc2+/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c 2004-09-20 19:30:52.515569520 +0200
@@ -415,6 +415,11 @@
cur_freq = get_cur_freq(policy->cpu);
for (i=0; i<p.state_count; i++) {
+ if (!p.states[i].core_frequency) {
+ centrino_model->op_points[i].frequency = CPUFREQ_ENTRY_INVALID;
+ continue;
+ }
+
if (extract_clock(centrino_model->op_points[i].index) !=
(centrino_model->op_points[i].frequency)) {
printk(KERN_DEBUG "Invalid encoded frequency\n");
@@ -424,8 +429,6 @@
if (cur_freq == centrino_model->op_points[i].frequency)
p.state = i;
- if (!p.states[i].core_frequency)
- centrino_model->op_points[i].frequency = CPUFREQ_ENTRY_INVALID;
}
return 0;
|
|
|
| Back to top |
|
|
gspr
Tux's lil' helper
Joined: 07 Sep 2002
Posts: 127
|
| Posted: Tue Sep 21, 2004 3:03 pm Post subject: |
|
|
Brilliant! Marvellous! It seems to work FLAWLESSLY!
Thanks a thousand times, dude!
May I suggest you get that patch off to Morton ASAP, if you haven't already done so? Certainly fixed the problem here at least.
For those of you in a hurry, here's a patch that will apply against 2.6.9-rc2-mm1: http://www.stud.ntnu.no/~spreeman/linux/patches/2.6.9-rc2-mm1/linux-2.6.9-rc2-mm1-brodo1.patch
_________________
"People said I should accept the world. Bullshit! I don't accept the world." -- RMS.
"We are to admit no more causes of natural things than such as are both true and sufficient to explain their appearances." -- Newton. |
|
| Back to top |
|
|
brodo
Guru
Joined: 15 Apr 2003
Posts: 319
|
| Posted: Tue Sep 21, 2004 4:02 pm Post subject: |
|
|
| Will push it upstream soon, for sure. Thanks for testing. |
|
| Back to top |
|
|
gspr
Tux's lil' helper
Joined: 07 Sep 2002
Posts: 127
|
| Posted: Sat Sep 25, 2004 1:08 am Post subject: |
|
|
Gone upstream yet? If not, I think I'll push it onto the lkml... I'm sure others are struggling in the same way I was, and they won't all be so lucky to find a helpful person such as yourself
_________________
"People said I should accept the world. Bullshit! I don't accept the world." -- RMS.
"We are to admit no more causes of natural things than such as are both true and sufficient to explain their appearances." -- Newton. |
|
| Back to top |
|
|
brodo
Guru
Joined: 15 Apr 2003
Posts: 319
|
| Posted: Sun Sep 26, 2004 5:15 pm Post subject: |
|
|
| gspr wrote: | | Gone upstream yet? If not, I think I'll push it onto the lkml... |
Not yet, as the cpufreq maintainer is away at the moment, and I only want to push really critical issues to Linus without his consent. Also, lkml isn't the right list, cpufreq AT www DOT linux DOT org DOT uk is the correct one. |
|
| Back to top |
|
|
gspr
Tux's lil' helper
Joined: 07 Sep 2002
Posts: 127
|
| Posted: Wed Sep 29, 2004 8:28 am Post subject: |
|
|
Oh, ok. I'll let you handle it then
_________________
"People said I should accept the world. Bullshit! I don't accept the world." -- RMS.
"We are to admit no more causes of natural things than such as are both true and sufficient to explain their appearances." -- Newton. |
|
| Back to top |
|
|
ubip
n00b
Joined: 03 Oct 2004
Posts: 1
Location: Austria/EU
|
| Posted: Sun Oct 03, 2004 8:40 am Post subject: thanx |
|
|
thanx -
this patch solved the speedstepping problem with my toshiba satellite m30 1.5G too -
finally i can use linux unplugged for more than 2h !
 ubip |
|
| Back to top |
|
|
jwever
n00b
Joined: 12 Sep 2003
Posts: 72
|
| Posted: Tue Oct 19, 2004 11:16 pm Post subject: |
|
|
| Does anyone know when this patch will be included in the mm-sources... is there a similar patch for gentoo-dev-sources? |
|
| Back to top |
|
|
brodo
Guru
Joined: 15 Apr 2003
Posts: 319
|
| Posted: Wed Oct 20, 2004 6:04 am Post subject: |
|
|
| there's no specific patch for gentoo-dev-sources, and it should get applied to bitkeeper soon, so it should be in mm quite soon as well. |
|
| Back to top |
|
|
momerath
n00b
Joined: 19 Oct 2002
Posts: 30
|
| Posted: Thu Nov 04, 2004 4:38 pm Post subject: |
|
|
| Does anyone know if the patch has now made it into -mm? |
|
| Back to top |
|
|
brodo
Guru
Joined: 15 Apr 2003
Posts: 319
|
| Posted: Thu Nov 04, 2004 4:49 pm Post subject: |
|
|
| it's in -mm |
|
| Back to top |
|
|
brodo
Guru
Joined: 15 Apr 2003
Posts: 319
|
| Posted: Tue Nov 16, 2004 10:11 pm Post subject: |
|
|
| patch is in 2.6.10-rc2 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
