| View previous topic :: View next topic |
| Author |
Message |
amdonati
Tux's lil' helper
Joined: 13 Oct 2002
Posts: 89
Location: Italy
|
 Posted: Mon Nov 11, 2002 8:34 pm Post subject: CD Burner, I know it was already discussed but... |
 |
|
I cannot find an answer.
I have a CDRW 8-4-32.
I followed all the steps for setting the CDRW (hdd=ide-scsi in Grub, setting the right parameters in the kernel,...) and the CDRW works as reader and is recognised by cdrecord scanbus and the k3b settings goes fine.
But when I try to burn a cd (creating iso files works). It always stops at around 5-7% (with k3b, but I tried xcdrecord with no better results):
This is the message I receive:
| Code: |
rack 01: 5 of 219 MB written (fifo 100%) [buf 97%] 4.2x.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 0A E6 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 38 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x38 Qual 0x00 (event status notification) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 5713920 bytes
Writing time: 13.611s
Average write speed 110.4x.
Min drive buffer fill was 97%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 61.492s
/usr/bin/cdrecord: fifo had 154 puts and 91 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 50 times full, min fill was 81%.
|
Any idea?
I am really lost, my cdrw worked under mdk 8.2, so should not be broken, and I need to burn some backup cds!
Thank you for the help
Adalberto
-----------------------
112512 |
|
| Back to top |
|
 |
BradN
Advocate
Joined: 19 Apr 2002
Posts: 2391
Location: Wisconsin (USA)
|
| Posted: Tue Nov 12, 2002 5:32 am Post subject: |
|
|
| try driveropts=burnproof if your drive supports it... in case it's somehow buffer underrun'ing... other than that I don't know. I doubt a 8x4 would support burnproof though, so I don't think this will help much. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
