Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Niek, Got some questions about oss.........updated
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
FINITE
Guru
Guru


Joined: 10 May 2002
Posts: 449

PostPosted: Mon May 20, 2002 8:02 am    Post subject: Niek, Got some questions about oss.........updated Reply with quote

Ok, I got it installed and it seems to have done what its supposed to do but I still have no sound. Not sure what the deal is. I did remove all of the alsa stuff and recompiled my kernel so that it did not have sound support at all, did that because when I tried to isntall oss it gave me an error about this and told me I needed to recompile. So If you have any ideas as to why I still have no sound pleas get back to me on this. I did fallow all the instructions, only thing I havnt done is to add sound on to the default run level (just typing sound on in term which works as well, sound off too). thanx.

Last edited by FINITE on Tue May 21, 2002 3:12 am; edited 1 time in total
Back to top
View user's profile Send private message
FINITE
Guru
Guru


Joined: 10 May 2002
Posts: 449

PostPosted: Mon May 20, 2002 9:00 am    Post subject: Reply with quote

Here is the error log from oss:

$1 PCI interrupt not allocated by BIOS
BIOS had not allocated an IRQ for one or more PCI sound device. This
means that PnP support was not enabled in BIOS setup.

This problem can be fixed in BIOS setup. Unfortunately
the exact procedure depends on BIOS version. On most systems this can be done
by setting the "PnP compatible OS" option to NO/OFF/DISABLED on the
PCI/PnP setup screen. On some other systems this can be done by setting
the "Plug & Play OS" option to "NO" in the Boot setup screen.

$2 AC97 codec/mixer chip is not responding.
The AC97 codec chip of one or more soundcard is inactive. This can usually
be fixed by turning off Power Management in BIOS setup.

$3 Interrupt storm was detected on IRQ%d.
OSS couldn't clear interrupt for a device. Usually this means that
there is some other device sharing the same interrupt (IRQ%d). This other
device is malfunctioning and keeps its interrupt line driven infinitely.

OSS has disconnected itself from IRQ%d which means that the sound
device doesn't work properly. Please resolve the IRQ conflict or
remove the offending device from the system. In some cases this can be
done by disabling the device in BIOS setup.

$4 Kernel compiled with support for >1G of RAM.
OSS is compiled for kernels with 1G physical memory limit. Your system
seems to be compiled with support for bigger memory. It would be too
dangerous to run OSS under kernel with different memory limit. For this
reason OSS or parts of it have been disabled in your system.

You need to recompile your kernel with the standard 1G memory limit.
Memory size can be set on the "Processor type and features" screen of
kernel's configurator (make menuconfig). Set the memory size to
1G or set the "High Memory Support" setting to off.

I do not have pnp os activated in the bios. As for the section saying the chip is inactive that is bs it works fine in windows. As for the irq conflict it is not sharing an irq with anyother device in the system and is on irq9. Now for the kernel error I have not checked on wether or not the kernel is compiled with the standard 1gig limit but I know I did not do anything with the highmem option just left it blank. Hope this helps with you helping me if you can. Thanx. And power management is disabled.
Back to top
View user's profile Send private message
Niek
Apprentice
Apprentice


Joined: 14 May 2002
Posts: 236
Location: Houten, The Netherlands

PostPosted: Mon May 20, 2002 11:37 am    Post subject: Reply with quote

Do I understand it right that you cannot install OSS, or do you get these error when OSS try to initialise your sound card?

Are you realy sure you don't have sound compiled into your kernel? Please post the output of 'lsmod', perhaps the module soundcore is loaded? If that is true, type 'rmmod soundcore' to unload the module.

The VIA software team is currently working on a dirver for the VIA8233A soundcard, but it seems that they want to release the dirver closed source, so only distro's like RedHat and SuSE are supported :( Look here for more info: http://forums.viaarena.com/messageview.cfm?catid=28&threadid=13756

Hope this helps :)

Niek.
Back to top
View user's profile Send private message
Niek
Apprentice
Apprentice


Joined: 14 May 2002
Posts: 236
Location: Houten, The Netherlands

PostPosted: Mon May 20, 2002 1:42 pm    Post subject: Reply with quote

You can also try to download and install the new OSS 3.9.6e, I noticed the following in the ChangeLog:

Support for VIA VT8233A based motherboard onboard audio added

Strange, sound was working very well for me in version 3.9.6d :?:
Back to top
View user's profile Send private message
Guest






PostPosted: Mon May 20, 2002 9:31 pm    Post subject: Reply with quote

I do have the latest version of oss, the one wit the "e". I found that there is an osstest exe. in the /usr/lib/oss dir and when I run that test I do have sound from both speakers. If I try and play sound by any other method it does not work. The only thing that I can think of that would cause this is that XMMS or Noatun do not see that they need to be using oss for some reason. I could not find an option to point noatun to oss but in xmms I did and it already was. As for the error log that I posted I think that was left over from the install or something and I still had some alsa stuff that I had not found yet to get rid of. I deleted that file and another one has not been created. So, here is where I stand with OSS so far. Any ideas?
Back to top
FINITE
Guru
Guru


Joined: 10 May 2002
Posts: 449

PostPosted: Mon May 20, 2002 11:28 pm    Post subject: Reply with quote

That was me if it wasn't obvious :D and when I said,"I deleted THAT file", I was talking about the error log file and it did not regenerate. I put in a request for support with the oss people but I doubt they will get back to me since I am using the eval version of the software. This problem HAS to be that xmms and noatun are not enteracting with the oss stuff the way they need to. If I use "play" from oss to play a wav file it works fine. Its as iff oss has secluded its self from everything so that no other program can use it.
Back to top
View user's profile Send private message
Niek
Apprentice
Apprentice


Joined: 14 May 2002
Posts: 236
Location: Houten, The Netherlands

PostPosted: Tue May 21, 2002 6:11 am    Post subject: Reply with quote

I think the problem is that you are using KDE, and the KDE soundserver (arts) is started. Disable arts in the Control Center -> Sound -> Sound server. If arts is disabled, I think you can use xmms and naotun.

Bye, Niek.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum